 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Geoff Heap
Joined: 12 Jan 2006
Posts: 266
Location: Lindenwold, New Jersey
|
 Posted: Sun May 14, 2006 9:02 am Post subject: 701 riveter access problem on firewall vert lower channel |
 |
|
Hey guys I've just hit an unexpected problem. Two channel doublers are riveted to the vertical lower channel on the firewall. One on each side. They are to support the bungee pin for the nose strut. Because the bungee sits so close, the plans call for the rivets to be pulled from the inside so as to have the dome head near the bungee. The 8 rivets close the fwd edge are a bit tight but O.K. The other 8 rivets are much deeper in and I cannot get a rivet gun or a hand puller in there. How did you do it. The photo guide shows that somebody at Zenith did it. I can shoot the rivets from the outside easy but they really are two close to the bungee for my comfort. Thanks guys........Geoff
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
 |
Jari Kaija
Joined: 23 Feb 2006
Posts: 69
|
| Posted: Sun May 14, 2006 10:52 am Post subject: 701 riveter access problem on firewall vert lower channel |
|
|
| Quote: | Hey guys I've just hit an unexpected problem. Two channel
doublers are riveted to the vertical lower channel on the firewall.
|
You mean these one? You can rivet them by "hand riveter". Pneumatic one
won't fit there...
http://www.project-ch701.net/ch701_fuselage/DSC03413.JPG
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
craig(at)craigandjean.com
Guest
|
| Posted: Sun May 14, 2006 1:18 pm Post subject: 701 riveter access problem on firewall vert lower channel |
|
|
Look in the photo-share for the Zenith list for shots of various designs for
the baffles (including Larry's). Look around Dec 11th, 2005
http://www.matronics.com/photoshare/zenith-list.html#Top
-- Craig
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
