Matronics Email Lists :: View topic - Section 39-10 WD-1010 Neutral Position?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Section 39-10 WD-1010 Neutral Position?

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

sean(at)stephensville.com
Guest

Posted: Mon May 09, 2011 3:20 pm Post subject: Section 39-10 WD-1010 Neutral Position?

In section 39-10 Step 2 where you are setting the correct rod end 

bearing lengths for the elevator push tubes it states to set the WD-1010 

control column and the elevator bellcrank to their neutral positions 

which allows you to adjust the rod end bearings for the correct length.



They tell you in section 11 how to set the bellcrank by the battery to 

neutral, but they do not mention the appropriate way to determine 

neutral for the WD-1010 control column?



-Sean #40303

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

rv10flyer

Joined: 25 Aug 2009
Posts: 364

Posted: Mon May 09, 2011 4:44 pm Post subject: Re: Section 39-10 WD-1010 Neutral Position?

See step 1. Fabricate the measuring jig. That sets WD-1010 to neutral. Keep it along with your aileron bellcrank jig for future use.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Wayne G.

sean(at)stephensville.com
Guest

Posted: Mon May 09, 2011 5:46 pm Post subject: Section 39-10 WD-1010 Neutral Position?

Ok, I think I understand this now.  They threw me off in the plans in 

Step 2 by saying "Check the neutral position of the WD-1010..."



Actually, the gauge fabricated in Step 1 determines the neutral 

position, so not sure why they would state that.



-Sean



On 5/9/11 3:16 PM, Sean Stephens wrote:

 	  Quote: 	
		   In section 39-10 Step 2 where you are setting the correct rod end 

 bearing lengths for the elevator push tubes it states to set the 

 WD-1010 control column and the elevator bellcrank to their neutral 

 positions which allows you to adjust the rod end bearings for the 

 correct length.



 They tell you in section 11 how to set the bellcrank by the battery to 

 neutral, but they do not mention the appropriate way to determine 

 neutral for the WD-1010 control column?



 -Sean #40303

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

sean(at)stephensville.com
Guest

Posted: Mon May 09, 2011 7:00 pm Post subject: Section 39-10 WD-1010 Neutral Position?

Yep.  I re-read it and was just confused by the first sentence of Step 2.



-Sean



On 5/9/11 7:44 PM, rv10flyer wrote:

 	  Quote: 	
		   



 See step 1. Fabricate the measuring jig. That sets WD-1010 to neutral. Keep it along with your aileron bellcrank jig for future use.



 --------

 Wayne Gillispie, A&amp;P 5/93, PPC 10/08

 Bldr# 40983 SB Started 12/1/09.

 Fuselage Sec 46 Eng mount/Gear- 1359 hrs to date.





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=339373#339373

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum