bertrv6(at)gmail.com
Guest
|
 Posted: Tue May 24, 2011 1:53 pm Post subject: RV6-List Digest: 3 Msgs - 05/22/11 |
 |
|
of course, yes yes
On Mon, May 23, 2011 at 3:00 AM, RV6-List Digest Server
<rv6-list(at)matronics.com> wrote:
| Quote: | *
�==================================================
� Online Versions of Today's List Digest Archive
�==================================================
Today's complete RV6-List Digest can also be found in either of the
two Web Links listed below. �The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. �The .txt file includes the plain ASCII version
of the RV6-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
� �http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 11-05-22&Archive=RV6
Text Version:
� �http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 11-05-22&Archive=RV6
�================================================
� EMail Version of Today's List Digest Archive
�================================================
� � � � � ----------------------------------------------------------
� � � � � � � � � � � � � RV6-List Digest Archive
� � � � � � � � � � � � � � � � � � �---
� � � � � � � � � � Total Messages Posted Sun 05/22/11: 3
� � � � � ----------------------------------------------------------
Today's Message Index:
----------------------
� � 1. 05:46 AM - Avery Rudder Cable Fairing �(colleenandbrett(at)comcast.net)
� � 2. 06:21 AM - Re: Avery Rudder Cable Fairing �(Jeff Orear)
� � 3. 08:37 AM - Re: Avery Rudder Cable Fairing �(John Brunke)
________________________________ �Message 1 �_____________________________________
Time: 05:46:55 AM PST US
From: colleenandbrett(at)comcast.net
Subject: Avery Rudder Cable Fairing
When installing the Avery Rudder Cable Fairing, does one still install the bolt
/ clamp to retain / locate the 3/8" diameter polyethylene tube as shown on drawing
# 34 or does this fairing alone pushing against this tube provide sufficient
retention?
Thanks.
Brett
Columbus, IN
RV-6AQ Installing the rudder cables
________________________________ �Message 2 �_____________________________________
Time: 06:21:43 AM PST US
Subject: Re: Avery Rudder Cable Fairing
From: Jeff Orear <jorear(at)new.rr.com>
Brett, I installed both the clamp and fairing. �More structurally sound and r
etains the poly tube much better than relying on the fairing alone.
Best Regards,
Jeff Orear
RV6A N782P
Peshtigo, WI
Sent from my iPad
On May 22, 2011, at 7:43 AM, colleenandbrett(at)comcast.net wrote:
> When installing the Avery Rudder Cable Fairing, does one still install the
�bolt / clamp to retain / locate the 3/8" diameter polyethylene tube as show
n on drawing # 34 or does this fairing alone pushing against this tube provi
de sufficient retention?
>
> Thanks.
>
> Brett
>
> Columbus, IN
>
> RV-6AQ Installing the rudder cables
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
________________________________ �Message 3 �_____________________________________
Time: 08:37:59 AM PST US
From: John Brunke <jdoody727(at)comcast.net>
Subject: Re: Avery Rudder Cable Fairing
I second Jeff's installation. � You would hate for something to jam back
there someday if the tubing came loose.
John Brunke
RV7QB slow build.
Saint Charles, IL
On May 22, 2011, at 8:20 AM, Jeff Orear wrote:
> Brett, I installed both the clamp and fairing. �More structurally
sound and retains the poly tube much better than relying on the fairing
alone.
>
> Best Regards,
>
> Jeff Orear
> RV6A N782P
> Peshtigo, WI
>
> Sent from my iPad
>
> On May 22, 2011, at 7:43 AM, colleenandbrett(at)comcast.net wrote:
>
>> When installing the Avery Rudder Cable Fairing, does one still
install the bolt / clamp to retain / locate the 3/8" diameter
polyethylene tube as shown on drawing # 34 or does this fairing alone
pushing against this tube provide sufficient retention?
>>
>>
>> Thanks.
>>
>>
>> Brett
>>
>> Columbus, IN
>>
>> RV-6AQ Installing the rudder cables
>>
>>
>>
>>
>>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
>
|
| | - The Matronics RV6-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV6-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
