davidlewendon(at)me.com Guest
|
Posted: Fri Jun 03, 2011 4:13 am Post subject: Radio problem |
|
|
Well my SWR meter arrived in the post and I have purchased a couple of convertors to go from the BNC on the radio to the PL259 on the SWR meter.
I could not get any reading using my Filser radio and I thought that the meter might be duff so I connected my hand held radio to the a/c antenna and everything was fine. I was getting a return reading of about 1.2 which is well within limits.
Whilst doing this check I noticed that the P1 PTT button was not working, it had been previously but now nothing, so I am going to do a continuity check on the PTT wires to see if that is the fault before checking the radio.
The P2 PTT works but it did not show up on the SWR test, I presume that it should send the same signal as the P1 button.
Regards
David Lewendon
Regards
David Lewendon
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|