Matronics Email Lists :: View topic - 582 carb float question

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

582 carb float question

Matronics Email Lists Forum Index -> RotaxEngines-List

View previous topic :: View next topic

Author Message

occom

Joined: 26 Aug 2006
Posts: 404

Posted: Mon Jun 13, 2011 1:39 pm Post subject: 582 carb float question

I have been having a problem with rough running at idle lately. I turned off

the fuel and was instantly rewarded with a smooth idle all the way down to

the stops. With fuel back on running on mag 1 or mag 2 alone resulted in a

slight worsening of the problem. I looked first at the floats and got

stopped there as the rectangular float is slightly sunk, at least 1/8-3/16

below the other float with the chamfered corners. 



I went to the spare carb set and found it was equipped only with the

rectangular floats, which appear to rub slightly on the cast-in passage in

the float bowl. So I can try those, they all appear to float at the right

height, with the brass finger right at the gas level. 



My question is this, did these Bings originally have all rectangular floats,

when did they change? Finally is there anything I might have overlooked,

although it seems like a rich problem to me.

- The Matronics RotaxEngines-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RotaxEngines-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum