Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Spinner

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

zsmith3rd(at)earthlink.ne
Guest

Posted: Wed May 17, 2006 4:57 am Post subject: Spinner

Tommy,



My spinner came with the kit from ZAC.  Since I already had the engine, but a pusher prop, ZAC supplied a three-blade GSC wood prop, with spinner.  The spinner was of the correct diameter but the attaching bolt was a bit too long.  (In my case at least, the bolt bottomed out in the hub before the spinner was tight)

The bolt was threaded about half its length so it was no problem to saw off nearly an inch on the little end.

You might want to find a bolt that fits (diameter & thread pitch) and take it with you to the big sale.....save gnashing of teeth later.

Also, a phone call to ZAC might get a spinner Make/Model to guide you.



Regards,



Zed/701/R912/90+%/etc/do not archive

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum