Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Bose A20 Headset - NR Power Button - Panel Power

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
Matt Dralle
Site Admin


Joined: 08 Nov 2005
Posts: 26320
Location: Livermore CA USA

PostPosted: Sat Jul 09, 2011 5:41 pm    Post subject: Bose A20 Headset - NR Power Button - Panel Power Reply with quote

Dear Listers,

I bought a couple pairs of the new Bose A20's for the RV-8 and they are very nice. NR is better than the Bose X's and they seem to fit my head a little better too.

But I quickly discovered that with the A20's you now have to hit the NR Power button *every time* you start the aircraft even if you have them panel powered. The older Bose X headsets have a slide switch for the NR power and so you can just put the slide switch in the On position and not worry about it.

I really didn't like having to turn the NR on all the time and having to remind my passengers about it, so I came up with a modification that will automatically turn the NR on when panel power is applied. Its pretty simple, but requires some special tools. Its completely self-contained inside the Control Module and works great. The modification is generally only for installations that are panel-powered, but you could do the modification to a unit that is normally battery powered with no adverse effect. With the modification, the NR Power button will work normally in battery power installations.

I created web page on the procedure including step-by-step photos and instructions. Feedback is welcome.

http://www.matronics.com/BoseA20AutoOnModification/

Matt
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 170+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Matt Dralle
Matronics Email List Administrator
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Tim Olson



Joined: 25 Jan 2007
Posts: 2879

PostPosted: Sat Jul 09, 2011 7:11 pm    Post subject: Bose A20 Headset - NR Power Button - Panel Power Reply with quote

Matt, you rock! That's awesome that you found a way to do
this. I'll definitely be taking at least one of mine
apart and trying this. If it goes well, I'll do 'em all.
It's the single thing I wish they had a dip switch for
that you could enable, and you got the answer. Thanks
for the great write-up.

Tim Olson - RV-10 N104CD
do not archive
On 7/9/2011 8:38 PM, Matt Dralle wrote:
Quote:

Dear Listers,

I bought a couple pairs of the new Bose A20's for the RV-8 and they
are very nice. NR is better than the Bose X's and they seem to fit
my head a little better too.

But I quickly discovered that with the A20's you now have to hit the
NR Power button *every time* you start the aircraft even if you have
them panel powered. The older Bose X headsets have a slide switch for
the NR power and so you can just put the slide switch in the On
position and not worry about it.

I really didn't like having to turn the NR on all the time and having
to remind my passengers about it, so I came up with a modification
that will automatically turn the NR on when panel power is applied.
Its pretty simple, but requires some special tools. Its completely
self-contained inside the Control Module and works great. The
modification is generally only for installations that are
panel-powered, but you could do the modification to a unit that is
normally battery powered with no adverse effect. With the
modification, the NR Power button will work normally in battery power
installations.

I created web page on the procedure including step-by-step photos and
instructions. Feedback is welcome.

http://www.matronics.com/BoseA20AutoOnModification/

Matt
- Matt Dralle RV-8 #82880 N998RV "Ruby Vixen" http://www.mattsrv8.com
- Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 170+ Hours TTSN - Rebuilding Fuselage After Landing
Mishap...



- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
Matt Dralle
Site Admin


Joined: 08 Nov 2005
Posts: 26320
Location: Livermore CA USA

PostPosted: Sun Jul 10, 2011 10:03 am    Post subject: Bose A20 Headset - NR Power Button - Panel Power Reply with quote

Very cool! I'm glad to hear others feel that same way and can utilize the procedure. Let me know how it works for you.

Matt

-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 170+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
At 08:07 PM 7/9/2011 Saturday, you wrote:
Quote:


Matt, you rock! That's awesome that you found a way to do
this. I'll definitely be taking at least one of mine
apart and trying this. If it goes well, I'll do 'em all.
It's the single thing I wish they had a dip switch for
that you could enable, and you got the answer. Thanks
for the great write-up.

Tim Olson - RV-10 N104CD
do not archive
On 7/9/2011 8:38 PM, Matt Dralle wrote:
>
>Dear Listers,
>
>I bought a couple pairs of the new Bose A20's for the RV-8 and they
>are very nice. NR is better than the Bose X's and they seem to fit
>my head a little better too.
>
>But I quickly discovered that with the A20's you now have to hit the
>NR Power button *every time* you start the aircraft even if you have
>them panel powered. The older Bose X headsets have a slide switch for
>the NR power and so you can just put the slide switch in the On
>position and not worry about it.
>
>I really didn't like having to turn the NR on all the time and having
>to remind my passengers about it, so I came up with a modification
>that will automatically turn the NR on when panel power is applied.
>Its pretty simple, but requires some special tools. Its completely
>self-contained inside the Control Module and works great. The
>modification is generally only for installations that are
>panel-powered, but you could do the modification to a unit that is
>normally battery powered with no adverse effect. With the
>modification, the NR Power button will work normally in battery power
>installations.
>
>I created web page on the procedure including step-by-step photos and
>instructions. Feedback is welcome.
>
>http://www.matronics.com/BoseA20AutoOnModification/
>
>Matt

-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 170+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Matt Dralle
Matronics Email List Administrator
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Tim Olson



Joined: 25 Jan 2007
Posts: 2879

PostPosted: Sun Jul 10, 2011 6:48 pm    Post subject: Bose A20 Headset - NR Power Button - Panel Power Reply with quote

Do you have a p/n or spec on the capacitor you used? I'd like
to try to buy the exact correct one to match what you did, or
at least a real similar one.

Tim Olson - RV-10 N104CD
do not archive
On 7/10/2011 12:55 PM, Matt Dralle wrote:
Quote:


Very cool! I'm glad to hear others feel that same way and can utilize the procedure. Let me know how it works for you.

Matt

-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 170+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
At 08:07 PM 7/9/2011 Saturday, you wrote:
>
>
> Matt, you rock! That's awesome that you found a way to do
> this. I'll definitely be taking at least one of mine
> apart and trying this. If it goes well, I'll do 'em all.
> It's the single thing I wish they had a dip switch for
> that you could enable, and you got the answer. Thanks
> for the great write-up.
>
> Tim Olson - RV-10 N104CD
> do not archive
> On 7/9/2011 8:38 PM, Matt Dralle wrote:
>>
>>
>>
>> Dear Listers,
>>
>> I bought a couple pairs of the new Bose A20's for the RV-8 and they
>> are very nice. NR is better than the Bose X's and they seem to fit
>> my head a little better too.
>>
>> But I quickly discovered that with the A20's you now have to hit the
>> NR Power button *every time* you start the aircraft even if you have
>> them panel powered. The older Bose X headsets have a slide switch for
>> the NR power and so you can just put the slide switch in the On
>> position and not worry about it.
>>
>> I really didn't like having to turn the NR on all the time and having
>> to remind my passengers about it, so I came up with a modification
>> that will automatically turn the NR on when panel power is applied.
>> Its pretty simple, but requires some special tools. Its completely
>> self-contained inside the Control Module and works great. The
>> modification is generally only for installations that are
>> panel-powered, but you could do the modification to a unit that is
>> normally battery powered with no adverse effect. With the
>> modification, the NR Power button will work normally in battery power
>> installations.
>>
>> I created web page on the procedure including step-by-step photos and
>> instructions. Feedback is welcome.
>>
>> http://www.matronics.com/BoseA20AutoOnModification/
>>
>> Matt

-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 170+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...



- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
Matt Dralle
Site Admin


Joined: 08 Nov 2005
Posts: 26320
Location: Livermore CA USA

PostPosted: Sun Jul 10, 2011 7:15 pm    Post subject: Bose A20 Headset - NR Power Button - Panel Power Reply with quote

I used a part described as "Package 1208, 50v X7R 10% .1uF" that I had in my parts drawer. Just about any .1uf cap will probably due, so don't sweat it too much. They just have to be small enough to lay flat and not hit the cover when its all put back together. I got the ones I have from Frys:

http://www.frys.com/product/1782512

Picture shown doesn't match the actual part. Looks like they're in stock and will ship them.

Matt

At 07:45 PM 7/10/2011 Sunday, you wrote:
Quote:


Do you have a p/n or spec on the capacitor you used? I'd like
to try to buy the exact correct one to match what you did, or
at least a real similar one.

Tim Olson - RV-10 N104CD
do not archive
On 7/10/2011 12:55 PM, Matt Dralle wrote:
>
>
>Very cool! I'm glad to hear others feel that same way and can utilize the procedure. Let me know how it works for you.
>
>Matt Dralle
>
>At 08:07 PM 7/9/2011 Saturday, you wrote:
>>
>>
>>Matt, you rock! That's awesome that you found a way to do
>>this. I'll definitely be taking at least one of mine
>>apart and trying this. If it goes well, I'll do 'em all.
>>It's the single thing I wish they had a dip switch for
>>that you could enable, and you got the answer. Thanks
>>for the great write-up.
>>
>>Tim Olson - RV-10 N104CD
>>do not archive
>>
>>
>>On 7/9/2011 8:38 PM, Matt Dralle wrote:
>>>
>>>
>>>
>>>Dear Listers,
>>>
>>>I bought a couple pairs of the new Bose A20's for the RV-8 and they
>>>are very nice. NR is better than the Bose X's and they seem to fit
>>>my head a little better too.
>>>
>>>But I quickly discovered that with the A20's you now have to hit the
>>>NR Power button *every time* you start the aircraft even if you have
>>>them panel powered. The older Bose X headsets have a slide switch for
>>>the NR power and so you can just put the slide switch in the On
>>>position and not worry about it.
>>>
>>>I really didn't like having to turn the NR on all the time and having
>>>to remind my passengers about it, so I came up with a modification
>>>that will automatically turn the NR on when panel power is applied.
>>>Its pretty simple, but requires some special tools. Its completely
>>>self-contained inside the Control Module and works great. The
>>>modification is generally only for installations that are
>>>panel-powered, but you could do the modification to a unit that is
>>>normally battery powered with no adverse effect. With the
>>>modification, the NR Power button will work normally in battery power
>>>installations.
>>>
>>>I created web page on the procedure including step-by-step photos and
>>>instructions. Feedback is welcome.
>>>
>>>http://www.matronics.com/BoseA20AutoOnModification/
>>>
>>>Matt Dralle
>>
>>-
>>Matt Dralle
>>RV-8 #82880 N998RV "Ruby Vixen"
>>http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
>>http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
>>http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
>>Status: 170+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Matt Dralle
Matronics Email List Administrator
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group