Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

axle Jack

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

lcottrell

Joined: 29 May 2006
Posts: 1494
Location: Jordan Valley, Or

Posted: Fri Jul 22, 2011 8:42 pm Post subject: axle Jack

Thom, I wanted to thank you for your clever idea on how to  lift your airplane. I managed to let my right tire get too low in pressure and  tore the valve stem. At first I thought that it might be too much trouble to  make one, so I talked the wife into putting a hydraulic jack under the axle  after I lifted the plane up. Then I found that the problem wasn't going to be  solved that quickly, so I made one of your jacks as best as I could remember out  of some scrap wafer board that I had, and was able to lift the plane easily and  safely without help.

 Great job!

 Larry

  

 Note: If you forward this email, please delete the  forwarding history, which includes my email address.

   [quote][b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
do not archive

Thom Riddle

Joined: 10 Jan 2006
Posts: 1597
Location: Buffalo, NY, USA (9G0)

Posted: Sat Jul 23, 2011 3:10 am Post subject: axle Jack

Larry,

 I made mine from a piece of 2x8 laying around and it worked well and was so quick to make I thought others might find use for it. I'm glad you benefited from it. 

Thom

  

On Sat, Jul 23, 2011 at 12:39 AM, Larry Cottrell <lcottrell1020(at)gmail.com (lcottrell1020(at)gmail.com)> wrote:

[quote]         Thom, I wanted to thank you for your clever idea on how to  lift your airplane. I managed to let my right tire get too low in pressure and  tore the valve stem. At first I thought that it might be too much trouble to  make one, so I talked the wife into putting a hydraulic jack under the axle  after I lifted the plane up. Then I found that the problem wasn't going to be  solved that quickly, so I made one of your jacks as best as I could remember out  of some scrap wafer board that I had, and was able to lift the plane easily and  safely without help.

 Great job!

 Larry

  

 Note: If you forward this email, please delete the  forwarding history, which includes my email address.

    	  Quote: 	
		  



get="_blank">http://www.matronics.com/Navigator?Kolb-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	


[b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
Thom Riddle
Buffalo, NY (9G0)

Don't worry about old age... it doesn't last very long.
- Anonymous

simonnelson(at)vodamail.c
Guest

Posted: Sat Jul 23, 2011 3:22 am Post subject: axle Jack

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">   Picture?Sy

Sent via my BlackBerry from Vodacom - let your email find you!From:  Thom Riddle <riddletr(at)gmail.com> 

Sender:  owner-kolb-list-server(at)matronics.com 

Date: Sat, 23 Jul 2011 07:08:01 -0400

To: <kolb-list(at)matronics.com>

ReplyTo:  kolb-list(at)matronics.com

Subject: Re: Kolb-List: axle Jack

Larry,

=A0I made mine from a pie= ce of 2x8 laying around and it worked well and was so quick to make I thoug= ht others might find use for it. I'm glad you benefited from it. 

Th= om

On Sat, Jul 23, 2011 at 12:39 AM, Lar= ry Cottrell <lcottrell1020(at)gmail.com ([email]lcottrell1020(at)gmail.com= [/email])> wrote:

[quote]         Thom, I wanted to thank you for your clever idea = on how to=20 lift your airplane. I managed to let my right tire get too low in pressure = and=20 tore the valve stem. At first I thought that it might be too much trouble t= o=20 make one, so I talked the wife into putting a hydraulic jack under the axle= =20 after I lifted the plane up. Then I found that the problem wasn't going=  to be=20 solved that quickly, so I made one of your jacks as best as I could remembe= r out=20 of some scrap wafer board that I had, and was able to lift the plane easily=  and=20 safely without help.

 Great job!

 Larry

 =A0

 Note: If you forward this email, please delete th= e=20 forwarding history, which includes my email address.

    	  Quote: 	

get=3D"_blank">http://www.matronics.com/Navigator?Kolb-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution

[b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Thom Riddle

Joined: 10 Jan 2006
Posts: 1597
Location: Buffalo, NY, USA (9G0)

Posted: Sat Jul 23, 2011 3:32 am Post subject: axle Jack

Search the archives for this thread and you will find the sketches and a link to a video of it in operation.



Thom



On Jul 23, 2011, at 7:24 AM, simonnelson(at)vodamail.co.za (simonnelson(at)vodamail.co.za) wrote:

 

[quote] Picture?



Sy



Sent via my BlackBerry from Vodacom - let your email find you!From:  Thom Riddle <riddletr(at)gmail.com (riddletr(at)gmail.com)> 

Sender:  owner-kolb-list-server(at)matronics.com (owner-kolb-list-server(at)matronics.com) 

Date: Sat, 23 Jul 2011 07:08:01 -0400

To: <kolb-list(at)matronics.com (kolb-list(at)matronics.com)>

ReplyTo:  [url=mailto:kolb-list(at)matronics.com]kolb-list(at)matronics.com (kolb-list(at)matronics.com)[/url]

 Subject: Re: axle Jack

Larry,

=A0I made mine from a pie= ce of 2x8 laying around and it worked well and was so quick to make I thoug= ht others might find use for it. I'm glad you benefited from it. 

Th= om

  

On Sat, Jul 23, 2011 at 12:39 AM, Lar= ry Cottrell <lcottrell1020(at)gmail.com (lcottrell1020(at)gmail.com)> wrote:

 	  Quote: 	
		            Thom, I wanted to thank you for your clever idea = on how to=20 lift your airplane. I managed to let my right tire get too low in pressure = and=20 tore the valve stem. At first I thought that it might be too much trouble t= o=20 make one, so I talked the wife into putting a hydraulic jack under the axle= =20 after I lifted the plane up. Then I found that the problem wasn't going=  to be=20 solved that quickly, so I made one of your jacks as best as I could remembe= r out=20 of some scrap wafer board that I had, and was able to lift the plane easily=  and=20 safely without help.

 Great job!

 Larry

 =A0

 Note: If you forward this email, please delete th= e=20 forwarding history, which includes my email address.

    	  Quote: 	
		  



get=3D"_blank">http://www.matronics.com/Navigator?Kolb-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	






3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

-List"">http://www.matronics.com/Navigator?Kolb-List

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

ref="http://forums.matronics.com">http://forums.matronics.com

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

uot;">http://www.matronics.com/contribution

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



	
 )â‰ ÃŠï¬‚Â¢{lÃ£7âˆ‚rÃ¢hÃ˜M4â€MiÂ«ÃºÂ¢Ãâ€šzÏ€ï¬Â¡Â .Ã†'Â´NÃ¤Â¢VÃ€Ã¤Ã€DÃ´Â®â€¢Ã¤Ã“Ã´Kâˆ‚Ã¥jâ„Ã‹Ã»',.+-ÃŠâ‰ âˆ«âˆ‘Â¨5Â´â€šÃ…Â´hÃ†â„Ã†Ã¥,zÃ¿^Ã´Â©Ãš.+-âˆ«Ã¿â€¢Ã¤Ã¿Ã»â‰¤Ã€ÃºÃ–Â´Ã¤Ã€TÃ¼Ã™Ã†nÂ«+Ã¤ÃµbÂ¢p+rÃ˜y'Ã¶â‰ Â»CÂ£	Ã‚Â°ÃŸ{ Â¨Ã…Ã†Ã¥,x(ZÂ¥P>-Â¢Â»Zâ‰ ÃŠÃŸvkÃºÃœkÃºÃœj+yÂ®kyÂ¯mâˆ‚Ã¼Ë‡âˆš&jâ„Ã‹Ã»',rÃ¢Ã¸5Â´â€šÃ…Â´hÂ¨â„¢%lâˆÂ¨âˆ‚mÃŸË‡ï£¿âˆš	Ã¶âˆ‚âˆ«'Ã¢Ã€Â¢oÃ•jÂ¯â€ jâ„+*Ã¢[.+-ËÂ£MÃ§ $Ã±NECIÂ©Ã»Ã‡âˆ‘Ã¶ÂµÂ 'ÂµÃˆÃŒj[(jË†Â¢Ã¯Â¶Ã‚zÂ¯Ã¶âˆ‚Ã±yÂ±hÃ†ÃˆÂ¨jï¬~mÃŸË‡ï¬‚Â¢ÂªÂ¶â‰¤fâ‰ Ã†Ã¢â€šrÂ«(Ã¶mÃŸË‡ï¬‚Â¢ÂªÂ¶â‰¤fâ‰ Ã†Ã¢â€šrÂ«(ÃµË†Ã£Ã¤Ã€BÂ¢{kÃ¢Âªâ‰ Ã¤Ã¢Ã·yÂ¥Â¢Âµâ€°Â·jy2Â¢ÃÃ‹Ã˜*.Ã†ÃŸzâˆ«.â‰¤Ã€Â©Â¶Ã¤ÃŒ1Â´mâˆ‚â€¢Ã¯â€šâ€šâ‰¤â€“Ã¶)â„Ãœâˆ‘Ã¼Ãœâ‚¬iË‡Â¸0Â¬fâ‰ Ã†Ã¢â€šrÂ«(ÃµËœ(Ã»â„â€šnÃŽbÂ¢xmâˆ‚Ã¼Ë‡âˆš&jâ„Ã‹Ã»',rÃ¢Ã¸rÃ¢ÃŒÃ†&Ã“âˆ‚*'ËÃ˜â‚¬ËË™'âˆ‘Ë™k{Ë†Ã‹w/Â·âˆ‚i

 [b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
Thom Riddle
Buffalo, NY (9G0)

Don't worry about old age... it doesn't last very long.
- Anonymous

simonnelson(at)vodamail.c
Guest

Posted: Sat Jul 23, 2011 4:00 am Post subject: axle Jack

Thanks for your helpSy

Sent via my BlackBerry from Vodacom - let your email find you!From:  Thom Riddle <riddletr(at)gmail.com> 

Sender:  owner-kolb-list-server(at)matronics.com 

Date: Sat, 23 Jul 2011 07:30:33 -0400

To: kolb-list(at)matronics.com<kolb-list(at)matronics.com>

ReplyTo:  kolb-list(at)matronics.com

Subject: Re: Kolb-List: axle Jack



Search the archives for this thread an= d you will find the sketches and a link to a video of it in operation.

<= br>Thom



On Jul 23, 2011, at 7:24 AM, simonnelson(at)vodamail.co.za ([email]simonn= elson(at)vodamail.co.za[/email]) wrote:

 

[quote] Picture?<= br>

Sy



Sent via my BlackBerry from Vodacom - let your email find y= ou!From:  Thom Riddle <riddletr(at)gmail.com ([email]riddletr(at)gm= ail.com[/email])> 

Sender:  owner-kolb-list-server(at)matronics.com ([email]owner-kolb-list-server(at)matroni= cs.com[/email]) 

Date: Sat, 23 Jul 2011 07:08:01 -0400

To: </= b><kolb-list(at)matronics.com>

[b]ReplyTo:  [url=mailto:kolb-list(at)matronics.com]kolb-list(at)matronics.com (kolb-list(at)matronics.com)[/url]= 

 Subject: Re: Kolb-List: axle Jack

Larry,

=3DA0I made mine from a pie=3D ce of 2x8 laying around and it worked well and was so quick to make I thoug= =3D ht others might find use for it. I'm glad you benefited from it. 

Th= =3D om

  

On Sat, Jul 23, 2011 at=  12:39 AM, Lar=3D ry Cottrell <lcott= rell1020(at)gmail.com (lcottrell1020(at)gmail.com)> wrote:

 	  Quote: 	
		            Thom, I wanted to thank you for you= r clever idea =3D on how to=3D20 lift your airplane. I managed to let my right tire get too low in pressure = =3D and=3D20 tore the valve stem. At first I thought that it might be too much trouble t= =3D o=3D20 make one, so I talked the wife into putting a hydraulic jack under the axle= =3D =3D20 after I lifted the plane up. Then I found that the problem wasn't going= =3D  to be=3D20 solved that quickly, so I made one of your jacks as best as I could remembe= =3D r out=3D20 of some scrap wafer board that I had, and was able to lift the plane easily= =3D  and=3D20 safely without help.

 Great job!

 Larry

 =3DA0

 Note: If you forward this email, pl= ease delete th=3D e=3D20 forwarding history, which includes my email address.

    	  Quote: 	
		  



get=3D3D"_blank">http://www.matronics.com/Navigator?Kolb-List

tp://forums.matronics.com

_blank">http://ww=

w.matronics.com/contribution



	






3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=

3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=

3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=

3D

-List"">http:=

//www.matronics.com/Navigator?Kolb-List

3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=

3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=

3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=

3D

ref=3D"http://forums.matronics.com">http://forums.matronics.com

3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=

3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=

3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=

3D

uot;">http://www.matronic=

s.com/contribution

3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=

3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=

3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=

3D



</=

font> 	
 )=E2=89=A0=C3=8A=EF=AC=82=C2=A2{l=C3=A37=E2=88=82r=C3=A2h=C3=98M4=E2=80=9DM= =1Fi=C2=AB=C3=BA=C2=A2=C3=8D=E2=80=9Az=CF=80=EF=AC=81=C2=A1=C2=A0.=C3=86&#3= 9;=C2=B4N=17=C3=A4=C2=A2V=C3=80=C3=A4=C3=80D=C3=B4=C2=AE=E2=80=A2=16=C3=A4= =C3=93=C3=B4K=1E=E2=88=82=17=C3=A5j=E2=81=84=C3=8B=C3=BB',.+-=15=C3=8A= =E2=89=A0=E2=88=AB=E2=88=91=C2=A85=C2=B4=E2=80=9A=C3=85=C2=B4h=C3=86=E2=81= =84=1B=C3=86=C3=A5,z=C3=BF^=C3=B4=C2=A9=C3=9A.+-=E2=88=AB=C3=BF=E2=80=A2=C3= =A4=C3=BF=C3=BB=E2=89=A4=C3=80=C3=BA=C3=96=C2=B4=0B=C3=A4=C3=80T=C3=BC=C3= =99=C3=86n=C2=AB+=C3=A4=C3=B5b=C2=A2p+r=18=C3=98y'=C3=B6=E2=89=A0=C2=BB= C=C2=A3	=C3=82=C2=B0=C3=9F{ =C2=A8=C3=85=C3=86=C3=A5,x(Z=C2=A5P=10>=1A-=C2=A2=C2=BBZ=E2=89=A0=C3=8A= =C3=9Fvk=C3=BA=C3=9Ck=C3=BA=C3=9Cj+y=C2=AEky=C2=AFm=E2=88=82=C3=BC=CB=87=E2= =88=9A=0C&j=E2=81=84=C3=8B=C3=BB',r=C3=A2=C3=B85=C2=B4=E2=80=9A=C3= =85=C2=B4h=C2=A8=E2=84=A2%l=E2=88=8F=C2=A8=E2=88=82=1Bm=C3=9F=CB=87=EF=A3= =BF=E2=88=9A	=C3=B6=E2=88=82=E2=88=AB'=C3=A2=C3=80=1C=C2=A2o=C3=95j=C2= =AF=E2=80=A0j=E2=81=84+*=C3=A2[.+-=CB=9D=C2=A3M=13=C3=A7 $=C3=B1=10=11NEC= =12I=C2=A9=C3=BB=C3=87=E2=88=91=C3=B6=C2=B5=C2=A0'=C2=B5=C3=88=C3=8Cj[(= j=CB=86=C2=A2=C3=AF=C2=B6=C3=82z=C2=AF=C3=B6=E2=88=82=17=C3=B1y=C2=B1h=C3= =86=C3=88=C2=A8j=1A=EF=AC=81~=1Bm=C3=9F=CB=87=EF=AC=82=C2=A2=C2=AA=C2=B6=E2= =89=A4f=E2=89=A0=C3=86=C3=A2=E2=80=9Ar=C2=AB(=C3=B6=1Bm=C3=9F=CB=87=EF=AC= =82=C2=A2=C2=AA=C2=B6=E2=89=A4f=E2=89=A0=C3=86=C3=A2=E2=80=9Ar=C2=AB(=C3=B5= =CB=86=C3=A3=C3=A4=C3=80B=C2=A2{k=C3=A2=C2=AA=E2=89=A0=C3=A4=C3=A2=C3=B7y= =C2=A5=C2=A2=C2=B5=E2=80=B0=C2=B7jy2=C2=A2=C3=81=C3=8B=C3=98*.=C3=86=07=C3= =9Fz=E2=88=AB.=E2=89=A4=C3=80=C2=A9=C2=B6=C3=A4=C3=8C1=C2=B4m=0E=E2=88=82= =E2=80=A2=C3=AF=E2=80=9A=E2=80=9A=E2=89=A4=E2=80=93=1D=C3=B6)=E2=81=84=C3= =9C=E2=88=91=C3=BC=C3=9C=E2=82=ACi=CB=87=C2=B80=C2=ACf=E2=89=A0=C3=86=C3=A2= =E2=80=9Ar=C2=AB(=C3=B5=CB=9C(=C3=BB=E2=81=84=E2=80=9An=C3=8Eb=C2=A2xm=E2= =88=82=C3=BC=CB=87=E2=88=9A=0C&j=E2=81=84=C3=8B=C3=BB',r=C3=A2=C3= =B8r=C3=A2=C3=8C=C3=86&=C3=93=E2=88=82*'=CB=9D=C3=98=E2=82=AC=CB=9D= =CB=99'=E2=88=91=CB=99k{=CB=86=C3=8Bw/=C2=B7=E2=88=82i

 [b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum