Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

SV: Fuel Pressure Sender

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
sidsel.svein(at)oslo.onli
Guest





PostPosted: Sun Jul 31, 2011 2:04 am    Post subject: SV: Fuel Pressure Sender Reply with quote

John,

The branch-off to the fuel pressure sender should be as close to the
carburetors as reasonably possible, as the purpose is to measure the
"in-pressure" to the carbs. One easy place is where the fuel line to the
right side carb branches off. Here is a T in your installation, I assume.
Replace this T with an X (a four-way cross), and connect the sender to the
fourth outlet of this cross.

If the sender at present is connected to the tank return line after the
restrictor (I assume you have a 912/912S), no wonder your EIS does not
register any pressure. The restrictor causes a significant pressure drop.
The restrictor sits inside the return line, just after it branches off from
the fuel line going to the left carb, if done according the Builder's
Manual, and is not visible from the outside.

Svein
LN-SKJ


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
sidsel.svein(at)oslo.onli
Guest





PostPosted: Sun Jul 31, 2011 3:52 am    Post subject: SV: Fuel pressure sender Reply with quote

John,

I have a VDO pressure sender and the Grand Rapids EIS, but I do not have the
settings readily available.

0 to 10 psi is a good range.

Svein


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group