 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
michael.cowan(at)lmco.com
Guest
|
 Posted: Thu Aug 04, 2011 6:15 am Post subject: EXTERNAL: Earl's oil cooler |
 |
|
Jim,
Here ya go: 61002 is the part number on mine. Good luck.
Mike
From: owner-pulsar-list-server(at)matronics.com [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of pilot 623
Sent: Wednesday, August 03, 2011 5:47 PM
To: pulsar-list(at)matronics.com; pulsar-builders(at)yahoo.com
Subject: EXTERNAL: Earl's oil cooler
I'm broken down in Searcy, AR and need help figuring out which Earl's oil cooler I have. The oil cooler developed a leak where one of the fittings goes in. I had a local guy (highly recommended) weld it and it looks like a dirt daubers nest now with several leaks and pinholes. I'm trying JB-Weld but as a backup, if I have to get a new cooler sent in, I need to know the Earl's part number. If any of you have the one supplied by Skystar and could give me the part number, I would be most appreciative.
Mine is dimensioned as follows:
Fitting centers 7.5"
Height 3"
Body width at the widest points 10.75"
Face width (b/t the tanks) 6.5"
Thickness 2"
Rows 8
Thanks for any help.
Jim
| Quote: | | s.com/Navigator?Pulsar-List">http://www.matronics.com/Navigator?Pulsar-List=======[/b] |
[/b] [/quote]01
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
 |
pilot623(at)gmail.com
Guest
|
| Posted: Thu Aug 04, 2011 7:27 am Post subject: EXTERNAL: Earl's oil cooler |
|
|
Is that an Earls or Skystar part number?
Sent from my Palm Pre on the Now Network from Sprint
On Aug 4, 2011 9:22 AM, Cowan, Michael <michael.cowan(at)lmco.com> wrote:
Jim,
Here ya go: 61002 is the part number on mine. Good luck.
Mike
From: owner-pulsar-list-server(at)matronics.com [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of pilot 623
Sent: Wednesday, August 03, 2011 5:47 PM
To: pulsar-list(at)matronics.com; pulsar-builders(at)yahoo.com
Subject: EXTERNAL: Earl's oil cooler
I'm broken down in Searcy, AR and need help figuring out which Earl's oil cooler I have. The oil cooler developed a leak where one of the fittings goes in. I had a local guy (highly recommended) weld it and it looks like a dirt daubers nest now with several leaks and pinholes. I'm trying JB-Weld but as a backup, if I have to get a new cooler sent in, I need to know the Earl's part number. If any of you have the one supplied by Skystar and could give me the part number, I would be most appreciative.
Mine is dimensioned as follows:
Fitting centers 7.5"
Height 3"
Body width at the widest points 10.75"
Face width (b/t the tanks) 6.5"
Thickness 2"
Rows 8
Thanks for any help.
Jim
| Quote: | | s.com/Navigator?Pulsar-List">http://www.matronics.com/Navigator?Pulsar-List======= |
[quote][b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
michael.cowan(at)lmco.com
Guest
|
| Posted: Thu Aug 04, 2011 7:45 am Post subject: EXTERNAL: Earl's oil cooler |
|
|
It’s Earls. Right off the Earl’s tag. Wouldn’t know the SS number.Â
From: owner-pulsar-list-server(at)matronics.com [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of Jim Fillman
Sent: Thursday, August 04, 2011 8:27 AM
To: pulsar-list(at)matronics.com
Subject: RE: EXTERNAL: Pulsar-List: Earl's oil cooler
Is that an Earls or Skystar part number?
Sent from my Palm Pre on the Now Network from Sprint
On Aug 4, 2011 9:22 AM, Cowan, Michael <michael.cowan(at)lmco.com> wrote:
Jim,
Here ya go: 61002 is the part number on mine. Good luck.
Mike
From: owner-pulsar-list-server(at)matronics.com [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of pilot 623
Sent: Wednesday, August 03, 2011 5:47 PM
To: pulsar-list(at)matronics.com; pulsar-builders(at)yahoo.com
Subject: EXTERNAL: Pulsar-List: Earl's oil cooler
I'm broken down in Searcy, AR and need help figuring out which Earl's oil cooler I have. The oil cooler developed a leak where one of the fittings goes in. I had a local guy (highly recommended) weld it and it looks like a dirt daubers nest now with several leaks and pinholes. I'm trying JB-Weld but as a backup, if I have to get a new cooler sent in, I need to know the Earl's part number. If any of you have the one supplied by Skystar and could give me the part number, I would be most appreciative.
Mine is dimensioned as follows:
Fitting centers 7.5"
Height 3"
Body width at the widest points 10.75"
Face width (b/t the tanks) 6.5"
Thickness 2"
Rows 8
Thanks for any help.
Jim
| Quote: | | s.com/Navigator?Pulsar-List">http://www.matronics.com/Navigator?Pulsar-List======= |
<p -="" list="" contribution="" web="" site="">
</p >
| Quote: | | _-============================================================_-=Â Â Â Â Â Â Â Â Â - The Pulsar-List Email Forum -_-= Use the Matronics List Features Navigator to browse |
0123456789 | Quote: | | s.com/Navigator?Pulsar-List">http://www.matronics.com/Navigator?Pulsar-List======= |
0 | Quote: | | s.com/Navigator?Pulsar-List">http://www.matronics.com/Navigator?Pulsar-List======= |
1 | Quote: | | s.com/Navigator?Pulsar-List">http://www.matronics.com/Navigator?Pulsar-List======= |
2 | Quote: | | s.com/Navigator?Pulsar-List">http://www.matronics.com/Navigator?Pulsar-List======= |
3 | Quote: | | s.com/Navigator?Pulsar-List">http://www.matronics.com/Navigator?Pulsar-List======= |
4 | Quote: | | s.com/Navigator?Pulsar-List">http://www.matronics.com/Navigator?Pulsar-List======= |
5 | Quote: | | s.com/Navigator?Pulsar-List">http://www.matronics.com/Navigator?Pulsar-List======= |
6 | Quote: | | s.com/Navigator?Pulsar-List">http://www.matronics.com/Navigator?Pulsar-List======= |
7 | Quote: | | s.com/Navigator?Pulsar-List">http://www.matronics.com/Navigator?Pulsar-List======= |
8
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
michael.cowan(at)lmco.com
Guest
|
| Posted: Thu Aug 04, 2011 8:00 am Post subject: EXTERNAL: Earl's oil cooler |
|
|
Jim,
I just got off the phone with the tech guy at Earl’s in Long Beach (310) 542-0856. He says that part no. (61002) is discontinued. They no longer make intermediate sizes. The part number you would be looking for is either a 21 series or if you want an inch wider, then go with the 41 series. If I can do anything to help, let me know.
- Mike (661)572-3688
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
