 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
tigeryak18t
Joined: 26 Sep 2009
Posts: 233
Location: PARIS FRANCE
|
 Posted: Sat Oct 01, 2011 2:54 pm Post subject: M462RF |
 |
|
Oh dear LIST
does anyone on this LIST know where I can find spare parts and technical data for a M462RF motor.
I need a tach generator, a cover for the rear shaft and probably a blade unless the MTV9 can be mounted on the shaft which I doubt.
Pictures of my motor can be found here : https://picasaweb.google.com/106676445988268949228/Moteur?authuser=0&feat=directlink
Any hints contact or technical data in order to put that motor back into operation would be greatly appreciated.
Thank you LIST
--
Didier BLOUZARD
didier.blouzard(at)gmail.com (didier.blouzard(at)gmail.com)
0624243672
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
_________________
Didier Tiger YAK18T
Member of Commemorative Air Force
French Wing |
|
| Back to top |
|
 |
dougsappllc(at)gmail.com
Guest
|
| Posted: Sat Oct 01, 2011 4:28 pm Post subject: M462RF |
|
|
Didier,Please contact me off list, I have several of these motors.
I think MTV9 requires a flanged crank shaft, the M462RF is a splinded shaft motor. The spline being slightly larger in dia than that used on the HS6A 285 hp engine.
Best,
Doug Sapp
On Sat, Oct 1, 2011 at 3:50 PM, Didier Blouzard <didier.blouzard(at)gmail.com (didier.blouzard(at)gmail.com)> wrote:
[quote]Oh dear LIST
does anyone on this LIST know where I can find spare parts and technical data for a M462RF motor.
I need a tach generator, a cover for the rear shaft and probably a blade unless the MTV9 can be mounted on the shaft which I doubt.
Pictures of my motor can be found here : https://picasaweb.google.com/106676445988268949228/Moteur?authuser=0&feat=directlink
Any hints contact or technical data in order to put that motor back into operation would be greatly appreciated.
Thank you LIST
--
Didier BLOUZARD
didier.blouzard(at)gmail.com (didier.blouzard(at)gmail.com)
0624243672
| Quote: |
et="_blank">http://www.matronics.com/Navigator?Yak-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
wlannon(at)shaw.ca
Guest
|
| Posted: Sun Oct 02, 2011 7:36 pm Post subject: M462RF |
|
|
Didier;
Further to Doug's post I believe the prop shaft on the MR462 engine is a Western standard SAE 20 spline.
I have not yet confirmed that observation. It is at this time just that - an observation.
If correct the only readily available Western propellor would be the Hamilton Standard 2B20.
However there should be Avia Propellor models in the Czech Republic designed for that engine.
Cheers;
Walt
[quote] ---
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
GeorgeCoy
Joined: 02 Dec 2010
Posts: 310
|
| Posted: Tue Oct 04, 2011 12:28 pm Post subject: M462RF |
|
|
I was speaking to Doug Sapp today and he was looking for a manual for th M462F engine. I remembered that I have one in English. I am going to make a copy for him. If anyone else wants one let me know and have Staples run off some more. It is about 85 pages and several are fold out 11 x 17 size with the diagrams, so it will be about $45 or so per copy.
I may have the manuals for the V520 propeller as well.
I know I have copies of all the service bulletins for the Z37, V520 and M462RF in Czech language as well.
There was a woman from China on the list offering parts for the CJ and Housai engines. I would like to contact her about making exhaust valves for the M14P.
George Coy
CAS Ltd.
714 Airport Rd.
Swanton VT 05488
802-868-5633 off
802-363-5782 cell
802-868-4465 Fax
george.coy(at)gmail.com (george.coy(at)gmail.com)
http://coyafct.com/
SKYPE george.coy
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Walter Lannon
Sent: Sunday, October 02, 2011 11:34 PM
To: yak-list(at)matronics.com
Subject: Re: M462RF
Didier;
Further to Doug's post I believe the prop shaft on the MR462 engine is a Western standard SAE 20 spline.
I have not yet confirmed that observation. It is at this time just that - an observation.
If correct the only readily available Western propellor would be the Hamilton Standard 2B20.
However there should be Avia Propellor models in the Czech Republic designed for that engine.
Cheers;
Walt
[quote]
---
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
