 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
galinhdz(at)gmail.com
Guest
|
 Posted: Mon Oct 10, 2011 11:07 am Post subject: Door hinge? |
 |
|
Where can I get a set of door hinges for the KIS-4? The hinge pin on my copilot door sheared off. Since I will have to replace it, I might as well replace both of them. Were the original ones made up by Lyle Hendricks?
Galin [quote][b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
 |
fredorosa(at)gmail.com
Guest
|
| Posted: Mon Oct 10, 2011 1:45 pm Post subject: Door hinge? |
|
|
I could use a set too. The passenger side door bumps the top when fully open so I need to drill the holes in the hinge in a different location.
Al
On Mon, Oct 10, 2011 at 3:06 PM, Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:
[quote]Where can I get a set of door hinges for the KIS-4? The hinge pin on my copilot door sheared off. Since I will have to replace it, I might as well replace both of them. Were the original ones made up by Lyle Hendricks?
Galin | Quote: |
et="_blank">http://www.matronics.com/Navigator?KIS-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
[b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
galinhdz(at)gmail.com
Guest
|
| Posted: Mon Oct 10, 2011 3:09 pm Post subject: Door hinge? |
|
|
Well that means we need at least 4 hinges. Maybe was can get some machine company (Like Hendricks) to make a batch of them. The more we have made up the better the price will be. Plus, it will provide us a place we can get more if we need them in the future.
Galin
On Mon, Oct 10, 2011 at 4:45 PM, ALFRED ROSA <fredorosa(at)gmail.com (fredorosa(at)gmail.com)> wrote:
[quote]I could use a set too. The passenger side door bumps the top when fully open so I need to drill the holes in the hinge in a different location.
Al
On Mon, Oct 10, 2011 at 3:06 PM, Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:
| Quote: | Where can I get a set of door hinges for the KIS-4? The hinge pin on my copilot door sheared off. Since I will have to replace it, I might as well replace both of them. Were the original ones made up by Lyle Hendricks?
Galin
|
| Quote: |
et="_blank">http://www.matronics.com/Navigator?KIS-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
[b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
fredorosa(at)gmail.com
Guest
|
| Posted: Mon Oct 10, 2011 4:25 pm Post subject: Door hinge? |
|
|
I would guess Lyle made them. Rich would know.
Al
On Mon, Oct 10, 2011 at 7:08 PM, Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:
[quote]Well that means we need at least 4 hinges. Maybe was can get some machine company (Like Hendricks) to make a batch of them. The more we have made up the better the price will be. Plus, it will provide us a place we can get more if we need them in the future.
Galin
On Mon, Oct 10, 2011 at 4:45 PM, ALFRED ROSA <fredorosa(at)gmail.com (fredorosa(at)gmail.com)> wrote:
| Quote: | I could use a set too. The passenger side door bumps the top when fully open so I need to drill the holes in the hinge in a different location.
Al
On Mon, Oct 10, 2011 at 3:06 PM, Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:
| Quote: | Where can I get a set of door hinges for the KIS-4? The hinge pin on my copilot door sheared off. Since I will have to replace it, I might as well replace both of them. Were the original ones made up by Lyle Hendricks?
Galin
|
|
| Quote: |
et="_blank">http://www.matronics.com/Navigator?KIS-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
[b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
galinhdz(at)gmail.com
Guest
|
| Posted: Thu Oct 13, 2011 3:00 pm Post subject: Door hinge? |
|
|
I contacted Lyle Hendricks to see if he made the original hinges. I sent him a detailed drawing with dimensions and photos of my broken hinge. He will check and see if he has the setup needed to make a production run. If not, he can still do it but at a higher cost. He also said that the bigger the production run the lower the individual cost will be and that the minimum run is 8 units. He estimates that for 8 units the cost will be about $40.00 for each hinge. He also said he can have them made up in about 2weeks.
If you want new hinges let me know so I can try to convince him to make a production run and maybe get a lower price per hinge.
Galin
On Mon, Oct 10, 2011 at 7:24 PM, ALFRED ROSA <fredorosa(at)gmail.com (fredorosa(at)gmail.com)> wrote:
[quote]I would guess Lyle made them. Rich would know.
Al
On Mon, Oct 10, 2011 at 7:08 PM, Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:
| Quote: | Well that means we need at least 4 hinges. Maybe was can get some machine company (Like Hendricks) to make a batch of them. The more we have made up the better the price will be. Plus, it will provide us a place we can get more if we need them in the future.
Galin
On Mon, Oct 10, 2011 at 4:45 PM, ALFRED ROSA <fredorosa(at)gmail.com (fredorosa(at)gmail.com)> wrote:
| Quote: | I could use a set too. The passenger side door bumps the top when fully open so I need to drill the holes in the hinge in a different location.
Al
On Mon, Oct 10, 2011 at 3:06 PM, Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:
| Quote: | Where can I get a set of door hinges for the KIS-4? The hinge pin on my copilot door sheared off. Since I will have to replace it, I might as well replace both of them. Were the original ones made up by Lyle Hendricks?
Galin
|
|
|
| Quote: |
et="_blank">http://www.matronics.com/Navigator?KIS-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
[b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
fredorosa(at)gmail.com
Guest
|
| Posted: Fri Oct 14, 2011 4:09 am Post subject: Door hinge? |
|
|
Galin,
I solved my problem using the original hinges so I wont need new ones. You might be able to bring a hinge to a local machine shop to make a pair at less cost. Also, if you can get away with just one side of the hinge new it would further reduce costs.
Al
On Thu, Oct 13, 2011 at 6:59 PM, Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:
[quote] I contacted Lyle Hendricks to see if he made the original hinges. I sent him a detailed drawing with dimensions and photos of my broken hinge. He will check and see if he has the setup needed to make a production run. If not, he can still do it but at a higher cost. He also said that the bigger the production run the lower the individual cost will be and that the minimum run is 8 units. He estimates that for 8 units the cost will be about $40.00 for each hinge. He also said he can have them made up in about 2weeks.
If you want new hinges let me know so I can try to convince him to make a production run and maybe get a lower price per hinge.
Galin
On Mon, Oct 10, 2011 at 7:24 PM, ALFRED ROSA <fredorosa(at)gmail.com (fredorosa(at)gmail.com)> wrote:
| Quote: | I would guess Lyle made them. Rich would know.
Al
On Mon, Oct 10, 2011 at 7:08 PM, Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:
| Quote: | Well that means we need at least 4 hinges. Maybe was can get some machine company (Like Hendricks) to make a batch of them. The more we have made up the better the price will be. Plus, it will provide us a place we can get more if we need them in the future.
Galin
On Mon, Oct 10, 2011 at 4:45 PM, ALFRED ROSA <fredorosa(at)gmail.com (fredorosa(at)gmail.com)> wrote:
| Quote: | I could use a set too. The passenger side door bumps the top when fully open so I need to drill the holes in the hinge in a different location.
Al
On Mon, Oct 10, 2011 at 3:06 PM, Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:
| Quote: | Where can I get a set of door hinges for the KIS-4? The hinge pin on my copilot door sheared off. Since I will have to replace it, I might as well replace both of them. Were the original ones made up by Lyle Hendricks?
Galin
|
|
|
|
| Quote: |
et="_blank">http://www.matronics.com/Navigator?KIS-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
[b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
