Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Electrical connectors on stall warning system

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
william(at)gbta.net
Guest
PostPosted: Tue Nov 29, 2011 6:49 am    Post subject: Electrical connectors on stall warning system Reply with quote
Hello again to everyone. I'm installing the stall warning system in my wing and need to connect the wires to it. Do I need a special crimper to crimp the ends to the wire or will a standard electrical crimper do the job. The fitting is an ES DV18-188M. I know I'll need a crimper down the road for various items. Is there one crimper that will do the job for the whole plane or is more than one type crimper necessary??? Which one do I need?

Bill
[quote][b]

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rene(at)felker.com
Guest
PostPosted: Tue Nov 29, 2011 7:18 am    Post subject: Electrical connectors on stall warning system Reply with quote
I used the following from Stein. Did everything I needed for both wire and coax. I used a Radio Shack crimper for the D-sub pins…..but Stein has better…..

I would recommend that you give Stein a call and have him help you put together a wiring kit with the right tools and adequate wire (size and color) for what you are planning on doing yourself. It may seem a little pricy when you buy it all at one time….but you will need it and….you will have shipping cost in the future.

http://www.steinair.net/store.cfm?tlcatid=28

SAT-001, SAT-030, SAT-031

Rene' Felker
N423CF
801-721-6080


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Billy & Tami Britton
Sent: Tuesday, November 29, 2011 7:46 AM
To: rv10-list(at)matronics.com
Subject: Electrical connectors on stall warning system

Hello again to everyone. I'm installing the stall warning system in my wing and need to connect the wires to it. Do I need a special crimper to crimp the ends to the wire or will a standard electrical crimper do the job. The fitting is an ES DV18-188M. I know I'll need a crimper down the road for various items. Is there one crimper that will do the job for the whole plane or is more than one type crimper necessary??? Which one do I need?



Bill
Quote:
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
Quote:
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
Quote:
0
Quote:
1
Quote:
2
[quote][b]

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Mauledriver(at)nc.rr.com
Guest
PostPosted: Tue Nov 29, 2011 8:06 am    Post subject: Electrical connectors on stall warning system Reply with quote
I'd 2nd that. I ended up doing my own panel and not using Stein for the panel, but he's the best place to go for advice and the right stuff... and by 'right stuff' I mean the stuff appropriate for our level of involvement.

Re crimpers and the link below - you'll probably find the SAT-001 and the SAT-030 die right for the stall warning job and 80% of the rest of your electrical work. The 'standard' crimpers commonly found in auto stores and such are less than what you want.

Yep, talking to Stein is a good thing. Getting a panel from him is good too.

Bill

On 11/29/2011 10:11 AM, Rene Felker wrote: [quote] <![endif]--> <![endif]-->
I used the following from Stein. Did everything I needed for both wire and coax. I used a Radio Shack crimper for the D-sub pins…..but Stein has better…..

I would recommend that you give Stein a call and have him help you put together a wiring kit with the right tools and adequate wire (size and color) for what you are planning on doing yourself. It may seem a little pricy when you buy it all at one time….but you will need it and….you will have shipping cost in the future.

http://www.steinair.net/store.cfm?tlcatid=28

SAT-001, SAT-030, SAT-031

Rene' Felker


[b]

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group