byoungplumbing(at)gmail.c Guest
|
Posted: Fri Dec 02, 2011 7:49 am Post subject: Kolb-List Digest: 17 Msgs - 12/01/11 |
|
|
From: Gary Aman <zeprep251(at)aol.com>
Boyd,
I moved the throttle from the center to the left side right after I bought
the MK3.That left me the center mounting pivot for the old throttle availab
le for a rudder trim system handle.I used a copper bug nut to clamp a cable
to the rudder cable then to a spring attached to a newly fabricated handle
that allowed me to apply tension on that cable for trim adjustments.It wor
ked but I went back to a fixed tab because it always needed the same amount
of trim at cruise.
G.Aman
Quote: | >>>>>>>>>>>>>>>>>>>>>
|
gary
that is why i mentioned put a stiffer spring, for one side only, in the
nose cone, pulling on one rudder peddle harder than the other. as for
me, my flying shoes has a sole that extends out a bit,,, i push on the
right peddle and shove the lip of my shoe under the copilot left peddld.
that works out just about right.
boyd
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|