Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Knobs and Dials

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
etienne.phillips(at)gmail
Guest





PostPosted: Thu Dec 01, 2011 9:43 am    Post subject: Knobs and Dials Reply with quote

Hi All

Not strictly aero-electric, but vaguely related...

I'm desperately looking for 2 knob assemblies for a 4mm shaft

From this catalogue http://docs-europe.electrocomponents.com/webdocs/002a/0900766b8002a402.pdf the parts numbers for the assembly are
S210 004 - Black knob
C210 Black 5 cap
D211 or D218 figure dial

I've tried RS Components, Mouser, Digikey, Mantech, Selco (who make them, have a $50 minimum charge, but don't have the figure dials), and a horde of others without success.

If I had one already, I'd consider making a mould and casting a new one!

Thanks, in desperation...
Etienne
[quote][b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
 
JLuckey(at)pacbell.net
Guest





PostPosted: Thu Dec 01, 2011 10:01 am    Post subject: Knobs and Dials Reply with quote

Just off the top of my head –

Could you get a more standard/easier-to-find knob for a 1/8 inch shaft (isn’t that about 3 mm?) and drill it out?




From: owner-aeroelectric-list-server(at)matronics.com [mailto:owner-aeroelectric-list-server(at)matronics.com] On Behalf Of Etienne Phillips
Sent: Thursday, December 01, 2011 09:40
To: aeroelectric-list(at)matronics.com
Subject: Knobs and Dials


Hi All

Not strictly aero-electric, but vaguely related...

I'm desperately looking for 2 knob assemblies for a 4mm shaft

>From this catalogue http://docs-europe.electrocomponents.com/webdocs/002a/0900766b8002a402.pdf the parts numbers for the assembly are
S210 004 - Black knob
C210 Black 5 cap
D211 or D218 figure dial

I've tried RS Components, Mouser, Digikey, Mantech, Selco (who make them, have a $50 minimum charge, but don't have the figure dials), and a horde of others without success.

If I had one already, I'd consider making a mould and casting a new one!

Thanks, in desperation...
Etienne
Quote:
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
Quote:
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
Quote:
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
[quote][b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
 
etienne.phillips(at)gmail
Guest





PostPosted: Thu Dec 01, 2011 9:34 pm    Post subject: Knobs and Dials Reply with quote

On 01 Dec 2011, at 7:58 PM, Jeff Luckey wrote:
Quote:
Just off the top of my head �

Could you get a more standard/easier-to-find knob for a 1/8 inch shaft (isn�t that about 3 mm?) and drill it out?





Hi Jeff
That is definitely an option, along with using a spacer sleeve to get the shaft size to 6mm. However, the 21mm knob diameter and the figure dials seem to be what makes this combination particularly hard to find.
Thanks for the input though Smile
Etienne
[quote][b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
 
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group