Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

912ULS running Rough

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RotaxEngines-List
View previous topic :: View next topic  
Author Message
beachyjeff(at)juno.com
Guest





PostPosted: Wed Dec 14, 2011 12:16 pm    Post subject: 912ULS running Rough Reply with quote

Last Saturday I was up early to fly to breakfast with some other LSA
pilots. During my mag check, I had a larger than usual drop and
considerable roughness on the lower plugs. It still was within Rotax
tolerances, so I took off. In flight I noticed more vibration than normal
so I turned around and landed. I checked with the Matronics List Rotax
guru, Roger Lee, who suggested I regap my plugs to .023 for winter
weather and do a carb balance. I installed new plugs gapped to .023 with
no change. I then did a pneumatic carb balance at 3500 RPM. The carbs
weren't off that much according to the gauges, but it made a world of
difference. Smooooooth! And same mag drop on both circuits. I still don't
understand why the roughness appeared on only one of the mag circuits,
and not both, but I'll be doing my carb balancing twice a year now rather
than just once. Thanks, Roger!
____________________________________________________________
LifeLock® Official Site
Identity Theft Can Happen to Anyone So Get Protection with LifeLock.
http://thirdpartyoffers.juno.com/TGL3141/4ee903228cf39c8c9bm01vuc


- The Matronics RotaxEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List
Back to top
elleryweld(at)aol.com
Guest





PostPosted: Wed Dec 14, 2011 2:47 pm    Post subject: 912ULS running Rough Reply with quote

You could have bad plug on one cylinder if it wer me I would check the plugs



Ellery Batchelder Jr.



--


- The Matronics RotaxEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RotaxEngines-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group