Matronics Email Lists :: View topic - 701 Flaperon Arm Separation

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

701 Flaperon Arm Separation

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

challgren(at)mac.com
Guest

Posted: Sat May 27, 2006 2:46 pm Post subject: 701 Flaperon Arm Separation

List:



I am building the first 701 wing and have a question.



  The plans (drawing 7-V-5) call for 1201 mm between the flaperon arm  

sets.  My inboard (#1 & #3) ones are 1199 mm apart (measured at the  

moment arm).  Is this OK?  #4 and #6 are 1210 mm apart but this could  

be reduced by about 7 mm by reversing #4 to outboard and #6 to  

inboard instead of what the plans call for.  (Much of the difference  

is due to the arms not being strictly vertical but rather leaning  

away from each other).  Note the flaperon arms can easily be leaned  

inward toward each other to achieve the 1201 called for in the  

plans.  What would you recommend or should I just modify the  

flaperons when I build them to correlate with the measurements I have  

on the arms?



Stan Challgren

701/Jab 3300 probably

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum