Matronics Email Lists :: View topic - Bing main jet air bleed orifice size.

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Bing main jet air bleed orifice size.

Matronics Email Lists Forum Index -> JabiruEngine-List

View previous topic :: View next topic

Author Message

aerobiz1(at)gmail.com
Guest

Posted: Mon Jan 16, 2012 12:04 pm Post subject: Bing main jet air bleed orifice size.

Hi Don,



Yes, I have made that mod as well.  I think it came out of the African guys.  I can't say that I noticed much of a difference, other than the plugs all read much the same after the mod, so I think the mixture distribution was improved due to better atomisation and temps were more even.  So I guess you could say it worked !

 



Martin



[quote]

Hi Martin

On the Matronics forum you recently mentioned that the main air bleed should be opened to 3/16".  Any idea if this is what they are doing at the South African Jabiru dealer to improve fuel and air mixing??  They have there own service bulletin on this, as seen on the Avcom forum.  Have you tried this bleed increase ??

 I recently drilled the idle air bleed to the 1.6 mm spec with good results, ( along with new O rings).  

 Thanks, Don 

[b]

- The Matronics JabiruEngine-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?JabiruEngine-List

Display posts from previous:

	Matronics Email Lists Forum Index -> JabiruEngine-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum