Matronics Email Lists :: View topic - Grand rapids cs02 / cs01 amp sensor

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Grand rapids cs02 / cs01 amp sensor

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

chris Sinfield

Joined: 28 Nov 2006
Posts: 270
Location: Sydney Australia

Posted: Fri Jan 20, 2012 9:46 pm Post subject: Grand rapids cs02 / cs01 amp sensor

Hi all

 > I am installing a Grand Rapids J6000 EIS in my aircraft.

> > Where have people wired the amp current sensor? and through whit size 

> > wire was it?

> > There are 2 different current sensors and they are for different size 

> > wires?

> >

> > you can use the CS-01 or CS-02 or amps. the most important difference 

> > is the size wire that is allowed for each.

> > the CS-01 100amp can fit up to a #4 wire and the CS-02 50amp can only 

> > fit up to #6 wire. so if you're using a big battery cable most

> > people require the #4 wire and the CS-01.

> >

> > So which one to use and where did you fit it in the elec circuit on a 

> > Jab3300?

> >

> > Chris

> > Zodiac XL

> > Jab 3300

> >

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum