 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
icubob(at)gmail.com
Guest
|
 Posted: Sat Jan 21, 2012 5:13 am Post subject: Grand rapids cs02 / cs01 amp sensor |
 |
|
i put mine on the cable from the battery after the starter so it monitored supply to the panel.
bob noffs
On Fri, Jan 20, 2012 at 11:46 PM, chris Sinfield <chris_sinfield(at)yahoo.com.au (chris_sinfield(at)yahoo.com.au)> wrote:
[quote]--> AeroElectric-List message posted by: "chris Sinfield" <chris_sinfield(at)yahoo.com.au (chris_sinfield(at)yahoo.com.au)>
Hi all
> I am installing a Grand Rapids J6000 EIS in my aircraft.
> > Where have people wired the amp current sensor? and through whit size
> > wire was it?
> > There are 2 different current sensors and they are for different size
> > wires?
> >
> > you can use the CS-01 or CS-02 or amps. the most important difference
> > is the size wire that is allowed for each.
> > the CS-01 100amp can fit up to a #4 wire and the CS-02 50amp can only
> > fit up to #6 wire. so if you're using a big battery cable most
> > people require the #4 wire and the CS-01.
> >
> > So which one to use and where did you fit it in the elec circuit on a
> > Jab3300?
> >
> > Chris
> > Zodiac XL
> > Jab 3300
> >
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=364425#364425
===========
-List" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
===========
http://forums.matronics.com
===========
le, List Admin.
="_blank">http://www.matronics.com/contribution
===========
[b]
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
 |
chris Sinfield
Joined: 28 Nov 2006
Posts: 270
Location: Sydney Australia
|
| Posted: Sun Jan 22, 2012 10:43 pm Post subject: Re: Grand rapids cs02 / cs01 amp sensor |
|
|
bob
what size wire did you use??
and was it a CS01 or a 02?
Chris
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
