Matronics Email Lists :: View topic - pulsar lll 3300 firewall forward onto a sp 100

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

pulsar lll 3300 firewall forward onto a sp 100

Matronics Email Lists Forum Index -> Pulsar-List

View previous topic :: View next topic

Author Message

docyukon(at)ptcnet.net
Guest

Posted: Thu Feb 16, 2012 3:08 pm Post subject: pulsar lll 3300 firewall forward onto a sp 100

Is the firewall footprint of a sp100 the same as that of a Pulsar lll , 

Could a 3300 firewell fwd kit for a pulsar lll be grafted onto a sp100? 

any ideas?                          Bill S         Pulsar lll  912  #528 

99.999 complete.

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

kdpalmer(at)mweb.co.za
Guest

Posted: Thu Feb 16, 2012 6:42 pm Post subject: pulsar lll 3300 firewall forward onto a sp 100

Hi Bill,

          Solly Melyon developed the SP100  maybe he could help you - try - 

sollymelyon(at)yahoo.com



K



---

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

TomisFlyingby(at)comcast.
Guest

Posted: Thu Feb 16, 2012 11:47 pm Post subject: pulsar lll 3300 firewall forward onto a sp 100

I believe it is Bill!  I remember Solly talking about how he got that O200 

stuffed in that firewall/cowl area!



Tom

---

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

kymc(at)internode.on.net
Guest

Posted: Fri Feb 17, 2012 1:39 am Post subject: pulsar lll 3300 firewall forward onto a sp 100

Hi Bill,  the firewall forward kit is exactly the same for both the Pulsar 111 and the SP100.  I had an SP100 with a 3300 firewall forward installation and another friend has a Pulsar 111 with the same 3300 firewall forward kit and it all works the same.  I think you will find that the same firewall was used for both and the extra width of the SP100 happens over the wings where the fuselage flares out.



cheers



Kym

Pulsar SP100 (sadly lost in an accident)

Vans RV6A - current plane



On 17/02/2012, at 9:37 AM, Bill S wrote:



 	  Quote: 	
		   

 

 Is the firewall footprint of a sp100 the same as that of a Pulsar lll , Could a 3300 firewell fwd kit for a pulsar lll be grafted onto a sp100? any ideas?                          Bill S         Pulsar lll  912  #528 99.999 complete.

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

bakerocb

Joined: 15 Jan 2006
Posts: 727
Location: FAIRFAX VA

Posted: Fri Feb 17, 2012 5:17 am Post subject: pulsar lll 3300 firewall forward onto a sp 100

2/17/2012



Hello Tom and Bill S, It was a Continental IO-240 B that Solly put on the 

prototype SP 100. I helped him obtain that engine from an Eagle 150 airplane 

that HGL was distributing in this country. See here:



http://www.avweb.com/news/newacft/182746-1.html



(The engine had been slightly damaged in shipment into this country.)



That was also the engine that caused Solly to emergency land the SP 100 when 

his fuel tank selector system was set up to draw fuel from one tank and 

return the bypassed fuel and vapor to the other tank. But there was so much 

fuel being bypassed (a normal condition for that engine's fuel system) that 

the first tank ran dry.



Since the crankcase for the IO-240 was adapted directly from the O-200 the 

mounting points on the firewall would be the same for both engines, but 

different cowling could be required to provide for the difference between 

the carbureted O-200 and the fuel injected IO-240.



'OC' Baker Says: "The best investment we can make is the time and effort to 

gather and understand knowledge."



========================================================



Time: 11:47:07 PM PST US

From: "Tom Gibbons" <TomisFlyingby(at)comcast.net>

Subject: Re: pulsar lll  3300  firewall forward   onto  a sp 

100

I believe it is Bill!  I remember Solly talking about how he got that O200

stuffed in that firewall/cowl area!



Tom

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

sollymelyon(at)yahoo.com
Guest

Posted: Mon Feb 20, 2012 3:04 pm Post subject: pulsar lll 3300 firewall forward onto a sp 100

Hello Bill,

 I was out of touch for a full week so I could'nt respond to your question.  I'll add a bit to what had already been posted here. 

 The SP100 shared the same FWL footprint as the pulsar III and you could mount a Rotax FWL FWD package onto a SP100.  You'll need to mount the battery on the FWL to compensate for the lighter engine.   Another good option was the Jabiru 3300.

 Jabiru has a FWL FWD kit for it.  

  

 Hope this helped.    



Solly Melyon

323.841.4822



--- On Thu, 2/16/12, Bill S <docyukon(at)ptcnet.net> wrote:



  	  Quote: 	
		  

From: Bill S <docyukon(at)ptcnet.net>

Subject: pulsar lll 3300 firewall forward onto a sp 100

To: pulsar-list(at)matronics.com

Date: Thursday, February 16, 2012, 3:07 PM



 --> Pulsar-List message posted by: "Bill S" <docyukon(at)ptcnet.net (docyukon(at)ptcnet.net)>



Is the firewall footprint of a sp100 the same as that of a Pulsar lll , Could a 3300 firewell fwd kit for a pulsar lll be grafted onto a sp100? any ideas?                          Bill S         Pulsar l href="http://www.matronics.com/Navigator?Pulsar-List" target=_blank>ht="http://forums.matronics.com/" target=_blank>http://forums.matronics.c                     &nbsf="http://www.matronics.com/contribution" =======





	
 [quote][b]

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Pulsar-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum