Matronics Email Lists :: View topic - #4 Screw pop rivet dimpler

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

#4 Screw pop rivet dimpler

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

william(at)gbta.net
Guest

Posted: Fri Feb 24, 2012 3:34 pm Post subject: #4 Screw pop rivet dimpler

I've bought an AFS AOA kit for installing into the wings  on my -10.  I don't have the kit yet but I was informed through a PM that I  will need a #4 screw pop rivet dimpler.  I've looked at both Avery and  Cleveland tools websites and don't see such a thing listed.   Where  can I find this at?   Can anyone who has installed the AOA kit please  let me know if I truly need this or is there another way of dimpling the screw  holes.  Also, Is there any more need for a #4 screw pop rivet dimpler   on the rest of the airframe?  If not, maybe someone would let me borrow one  (I'd cover shipping--unless it's just cheaper/easier to buy one).

  

 Thanks in advance again,

  

 Bill

  

   [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

n223rv(at)wolflakeairport
Guest

Posted: Fri Feb 24, 2012 4:29 pm Post subject: #4 Screw pop rivet dimpler

Try a 1/8" #30 dimpler.  I'm pretty sure it's about the correct size....



Sent from my iPhone



On Feb 24, 2012, at 6:31 PM, "Billy & Tami Britton" <william(at)gbta.net (william(at)gbta.net)> wrote:



[quote]     I've bought an AFS AOA kit for installing into the wings  on my -10.  I don't have the kit yet but I was informed through a PM that I  will need a #4 screw pop rivet dimpler.  I've looked at both Avery and  Cleveland tools websites and don't see such a thing listed.   Where  can I find this at?   Can anyone who has installed the AOA kit please  let me know if I truly need this or is there another way of dimpling the screw  holes.  Also, Is there any more need for a #4 screw pop rivet dimpler   on the rest of the airframe?  If not, maybe someone would let me borrow one  (I'd cover shipping--unless it's just cheaper/easier to buy one).

  

 Thanks in advance again,

  

 Bill

  

    	  Quote: 	
		  

	


[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

dave.saylor.aircrafters(a
Guest

Posted: Fri Feb 24, 2012 4:31 pm Post subject: #4 Screw pop rivet dimpler

Bill,



A #4 screw is really close to a -4 flush rivet.  You could mount a

dimple die in some sort of holder (like a bucking bar with a 1/8" hole

drilled in it) and put a very short rivet or screw through the skin

then drive it down gently with a flat set.



--Dave Saylor



On Fri, Feb 24, 2012 at 3:31 PM, Billy & Tami Britton <william(at)gbta.net> wrote:

 	  Quote: 	
		   I've bought an AFS AOA kit for installing into the wings on my -10.  I don't

 have the kit yet but I was informed through a PM that I will need a #4 screw

 pop rivet dimpler.  I've looked at both Avery and Cleveland tools websites

 and don't see such a thing listed.   Where can I find this at?   Can anyone

 who has installed the AOA kit please let me know if I truly need this or is

 there another way of dimpling the screw holes.  Also, Is there any more need

 for a #4 screw pop rivet dimpler  on the rest of the airframe?  If not,

 maybe someone would let me borrow one (I'd cover shipping--unless it's just

 cheaper/easier to buy one).



 Thanks in advance again,



 Bill

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum