BARRY CHECK 6
Joined: 15 Mar 2011 Posts: 738
|
Posted: Tue May 01, 2012 6:37 am Post subject: [lycoming] Re: Odd running cylinder - cured! |
|
|
Ralph:
If you would, do the disassembly over a clean white cloth. I'm betting on
something like dirt <-- Which will be difficult to find. Or a scratch/nick
in the injector nozzle to seat area.
Are you familiar with the problem of lead fuel deposits in primer lines?
I'm wondering if that might be happening in the injector? The cure for
this is to soak the parts in HOPPE"S Gun Cleaning Solvent #9.
Good Luck,
Barry
On Tue, May 1, 2012 at 10:14 AM, Ralph E. Capen <recapen(at)earthlink.net>wrote:
[quote]
recapen(at)earthlink.net>
Disassembly and evaluation is on my list of things to do next.....
The injector and restrictor are sitting on my workbench waiting for me to
inspect them....
My prioirites at the time were focused on the fix and the subsequent test
flight to determine results - but I didn't throw the parts away when I got
back either.
I'll post the inspection results shortly.
Great question!
>--
| - The Matronics LycomingEngines-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?LycomingEngines-List |
|
|
|