Matronics Email Lists :: View topic - clearance of rudder cables

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

clearance of rudder cables

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

rpf(at)wi.rr.com
Guest

Posted: Thu Jun 01, 2006 6:39 pm Post subject: clearance of rudder cables

I'm building a 601xl and have a question regarding the cable fairleads =

instruction (6-B-22 dated 03/04).  I've attached the faileads to the =

rear frame channel (6B5-2) and main spar for the rudder cables.  When I =

run the rudder cables through the main spar and torgue tube support =

bracket (6B17-1) lighting holes there's not that much clearance for the =

control horn on the aileron torgue tube (6B17-4).  I know the aileron =

deflection is only about 11 degrees but I'm wondering if there is enough =

room so the aileron horn does not hit the rudder cables.  I'm not sure =

if this applies to the HD or HDS but I know some of you recently =

completed your XL's and would appreciate your experiences with this. =20



Thank you,

Randy Ferri

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum