Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

engine mount for 701

Matronics Email Lists Forum Index -> Zenith701801-List

View previous topic :: View next topic

Author Message

frank goodnight

Joined: 27 Dec 2011
Posts: 126

Posted: Sun Jul 08, 2012 6:49 pm Post subject: engine mount for 701

[img]cid:1341801640670(at)dclient.mail.yahoo.com[/img] Hi,

I need a engine mount --bed type-- to mate a 912 to a 701.

If you have one for sale, call Frank (at) 956-371-5924. 

Thanks,  Frank Goodnight

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

--static--liam_heartbubbles_bottomleft.jpg

Description:

Filesize:

12.03 KB

Viewed:

4361 Time(s)

john.marzulli(at)gmail.co
Guest

Posted: Sun Jul 08, 2012 9:32 pm Post subject: engine mount for 701

Is there any reason it has to be the "bed type"? The new Zenith mounts are designed to be compatible with the old mounts.



I would highly suggest the retrofit. Having flown both types, the ring mount is far superior.

 



Good luck,

John Marzulli



http://MarzulliPhoto.net/

http://701Builder.blogspot.com/

  



On Sun, Jul 8, 2012 at 7:47 PM, frank goodnight <frank.goodnight(at)att.net (frank.goodnight(at)att.net)> wrote:

 	  Quote: 	
		    [img]cid:1341801640670(at)dclient.mail.yahoo.com[/img]   Hi,

I need a engine mount --bed type-- to mate a 912 to a 701.

If you have one for sale, call Frank (at) [url=tel:956-371-5924]956-371-5924[/url]. 

Thanks,  Frank Goodnight

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

--static--liam_heartbubbles_bottomleft.jpg

Description:

Filesize:

12.03 KB

Viewed:

4358 Time(s)

frank goodnight

Joined: 27 Dec 2011
Posts: 126

Posted: Mon Jul 09, 2012 3:54 am Post subject: engine mount for 701

H

From: John Marzulli <john.marzulli(at)gmail.com>

To: zenith701801-list(at)matronics.com

Sent: Mon, July 9, 2012 12:32:52 AM

Subject: Re: engine mount for 701

 Is there any reason it has to be the "bed type"? The new Zenith mounts are designed to be compatible with the old mounts.

I would highly suggest the retrofit. Having flown both types, the ring mount is far superior.

Good luck,

John Marzulli

Hi John, 

I am building a 701 ,and am about ready to hang the engine, a 912 ULS. That I bought  with a Titan 

Tornado  So I don't believe I will need most of the parts that come

in Zeniths (firewall forward package) Hopefully, just the mount and cowling. I'm new to the 701

so don't really know what to do . I thought the bed mount would be cheaper , and the 701 has been flying 

for 20 years with them so I figured --try that--.  Any advice form you or anyone that has been there

would be greatly appreciated.

Frank Goodnight

Fayetteville , ARK

http://MarzulliPhoto.net/

http://701Builder.blogspot.com/

On Sun, Jul 8, 2012 at 7:47 PM, frank goodnight <frank.goodnight(at)att.net (frank.goodnight(at)att.net)> wrote:

 	  Quote: 	
		    [img]cid:1.4251125179(at)web181009.mail.ne1.yahoo.com[/img]   Hi,

I need a engine mount --bed type-- to mate a 912 to a 701.

If you have one for sale, call Frank (at) 956-371-5924. 

Thanks,  Frank Goodnight

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

--static--liam_heartbubbles_bottomleft.jpg

Description:

Filesize:

12.03 KB

Viewed:

4351 Time(s)

Tommy Walker

Joined: 12 Jan 2006
Posts: 442
Location: Anniston, AL 36207

Posted: Mon Jul 09, 2012 5:11 am Post subject: Engine Mount for 701

I agree with John.  I built two 701s.  The first had the old bed mount and the second I used the new ring mount.  Much, much smoother operation.  but, I'm sure it costs more.  There is an aftermarket company in CA that produces a ring that is a few hundred dollars cheaper than the Rotax ring. 



Good luck.

'

Tommy Walker in Alabama

N7462M

N8701

N8701T

N25A (building Kitfox SuperSport)

  [quote][b]

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

_________________
Tommy Walker
N25A - Anniston, AL

n752ms(at)softcom.net
Guest

Posted: Mon Jul 09, 2012 8:59 am Post subject: engine mount for 701

Frank.

I don't know if the engine you have has the Rotax air intake or not. For the 912uls it is recommended by Rotax, to get the 100hp out of the engine, and it also gives you carb heat.  The air box clears the ring mount but not the mount that goes between the ring and firewall. 

Zenith just tells you to toss out that thousand dollar part and put on a couple of K&N filters. But that is like running with the carb heat on all the time.  

The bed mount will clear the Rotax supplied air box. Giving you cold air for flying and carb heat if you need it. 



Sent from Mark's iPad



On Jul 8, 2012, at 7:47 PM, frank goodnight <frank.goodnight(at)att.net (frank.goodnight(at)att.net)> wrote:



[quote]<--static--liam_heartbubbles_bottomleft.jpg> Hi,

I need a engine mount --bed type-- to mate a 912 to a 701.

If you have one for sale, call Frank (at) 956-371-5924. 

Thanks,  Frank Goodnight



   

  



[b]

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

craig(at)craigandjean.com
Guest

Posted: Mon Jul 09, 2012 9:36 am Post subject: engine mount for 701

I have the old Skyshop 701 Rotax FWF which uses the bed mount and the Rotax airbox. But their plans show that you have to modify the airbox to make it fit. The photos they provide show the center section being sliced out and rotated about 15-20 degrees such that the two intake tubes are at 90 degrees relative to the carb outlets. Pictures (Matronics willing) attached.

 

FWIW: I asked Michael Heintz about the (new at the time) ring mount. He had flown both and did not see a world of difference. Also I am not sure if the new mount is compatible with a cowl intended for the bed mount.

 

-- Craig

 

From: owner-zenith701801-list-server(at)matronics.com [mailto:owner-zenith701801-list-server(at)matronics.com] On Behalf Of Mark S.

Sent: Monday, July 09, 2012 9:59 AM

To: zenith701801-list(at)matronics.com

Subject: Re: engine mount for 701

 

Frank.



 



I don't know if the engine you have has the Rotax air intake or not. For the 912uls it is recommended by Rotax, to get the 100hp out of the engine, and it also gives you carb heat.  The air box clears the ring mount but not the mount that goes between the ring and firewall. 



 



Zenith just tells you to toss out that thousand dollar part and put on a couple of K&N filters. But that is like running with the carb heat on all the time.  



 



The bed mount will clear the Rotax supplied air box. Giving you cold air for flying and carb heat if you need it. 



Sent from Mark's iPad

On Jul 8, 2012, at 7:47 PM, frank goodnight <frank.goodnight(at)att.net (frank.goodnight(at)att.net)> wrote:

 	  Quote: 	
		  

<--static--liam_heartbubbles_bottomleft.jpg>

Hi,



I need a engine mount --bed type-- to mate a 912 to a 701.



If you have one for sale, call Frank (at) 956-371-5924. 



Thanks,  Frank Goodnight



 	  Quote: 	
		    http://www.matronics.com/Navigator?Zenith701801-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

airbox2.png

Description:

Filesize:

697.77 KB

Viewed:

4346 Time(s)

air_box.png

Description:

Filesize:

759.83 KB

Viewed:

4346 Time(s)

dougsnash

Joined: 14 Apr 2008
Posts: 281

Posted: Mon Jul 09, 2012 10:20 am Post subject: Engine Mount for 701

Bullyhawk sells an aftermarket Rotax style ring mount.

The newer firewall forward kit was developed to stop the tail mount cracking resulting from the 100hp engine.  If you are using the 912ULS, go with ring mount.

I am currently flying the bed mount with my 80hp engine but will be updating to the ring mount next year.

Doug M

CH-701 from scratch

NW Ontario, Canada



        From: Tommy Walker <twalker(at)cableone.net>

 To: zenith701801-list(at)matronics.com 

 Sent: Monday, July 9, 2012 8:09:46 AM

 Subject: RE: Engine Mount for 701

  

 

I agree with John.  I built two 701s.  The first had the old bed mount and the second I used the new ring mount.  Much, much smoother operation.  but, I'm sure it costs more.  There is an aftermarket company in CA that produces a ring that is a few hundred dollars cheaper than the Rotax ring. 



Good luck.

'

Tommy Walker in Alabama

N7462M

N8701

N8701T

N25A (building Kitfox SuperSport)

  [quote]http://www.matronics.com/Navigator?Zenith701801-Listhttp://=======================


[b]

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

dougsnash

Joined: 14 Apr 2008
Posts: 281

Posted: Mon Jul 09, 2012 11:09 am Post subject: engine mount for 701

Craig, and Frank.  According to Roger (when I asked a few years ago) the bed mount/ring mount cowls are mutually exclusive.  Both are still available from Zenith.

Doug MacDonald

        From: Craig Payne <craig(at)craigandjean.com>

 To: zenith701801-list(at)matronics.com 

 Sent: Monday, July 9, 2012 12:36:06 PM

 Subject: RE:  engine mount for 701

I have the old Skyshop 701 Rotax FWF which uses the bed mount and the Rotax airbox. But their plans show that you have to modify the airbox to make it fit. The photos they provide show the center section being sliced out and rotated about 15-20 degrees such that the two intake tubes are at 90 degrees relative to the carb outlets. Pictures (Matronics willing) attached.

FWIW: I asked Michael Heintz about the (new at the time) ring mount. He had flown both and did not see a world of difference. Also I am not sure if the new  mount is compatible with a cowl intended for the bed mount.

-- Craig

From: owner-zenith701801-list-server(at)matronics.com [mailto:owner-zenith701801-list-server(at)matronics.com] On Behalf Of Mark S.

Sent: Monday, July 09, 2012 9:59 AM

To:  zenith701801-list(at)matronics.com

Subject: Re: engine mount for 701

Frank.

I don't know if the engine you have has the Rotax air intake or not. For the 912uls it is recommended by Rotax, to get the 100hp out of the engine, and it also gives you carb heat.  The air box clears the ring mount but not the mount that goes between the ring and firewall. 

Zenith just tells you to toss out that thousand dollar part and put on a couple of K&N filters. But that is like running with the carb heat on all the time.  

The bed mount will clear the Rotax supplied air box. Giving you cold air for flying and carb heat if you need it. 

Sent from Mark's iPad

On Jul 8, 2012, at 7:47 PM, frank goodnight <frank.goodnight(at)att.net (frank.goodnight(at)att.net)> wrote:

 	  Quote: 	
		  <--static--liam_heartbubbles_bottomleft.jpg>

Hi,

I need a engine mount --bed type-- to mate a 912 to a 701.

If you have one for sale, call Frank (at) 956-371-5924. 

Thanks,  Frank Goodnight

  http://www.matronics.com/Navigator?Zenith701801-List

0 	  Quote: 	

1 	  Quote: 	

2 	  Quote: 	

3 	  Quote: 	

4 	  Quote: 	

5 	  Quote: 	

6 	  Quote: 	

7

 [quote][b]

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith701801-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum