 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
teamgrumman(at)yahoo.com
Guest
|
 Posted: Tue Jul 17, 2012 9:37 am Post subject: AG5B Yokes |
 |
|
I have a complete set of AG5B yokes, brackets, and nylon bushings. I thought the new owner of Travis' plane wanted them for conversion. I think Garner told Cliff they wouldn't work. Garner doesn't know that 28840 has a flat panel just like an AG5B and that they'd work just fine. So, if you want a set of AG5B yokes, I'll sell them. I had the brackets powder coated in black wrinkle. $300 and they are yours. Convert your plane to the AG5B yokes.
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
| Description: |
|
| Filesize: |
1.15 MB |
| Viewed: |
1382 Time(s) |
|
| Description: |
|
| Filesize: |
1.03 MB |
| Viewed: |
1382 Time(s) |
|
|
|
| Back to top |
|
 |
flyv35b(at)minetfiber.com
Guest
|
| Posted: Wed Jul 18, 2012 5:05 am Post subject: AG5B Yokes |
|
|
| Quote: | I have a complete set of AG5B yokes, brackets, and nylon bushings. I
thought the new owner of Travis' plane wanted them for conversion. I
think Garner told Cliff they wouldn't work. Garner doesn't know that
28840 has a flat panel just like an AG5B and that they'd work just fine.
So, if you want a set of AG5B yokes, I'll sell them. I had the brackets
powder coated in black wrinkle. $300 and they are yours. Convert your
plane to the AG5B yokes.
|
Gary, I'm on a motorcycle trip out in CO, etc now and haven't contacted
Brian and Ruth, but I'm sure they will want the yokes and for you to have
them powdercoated and ready to install. I'll call them and have them call
you.
Cliff
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
|
cloudvalley(at)comcast.ne
Guest
|
| Posted: Wed Jul 18, 2012 5:40 am Post subject: AG5B Yokes |
|
|
Hi Gary,
We found out that the shafts were only 17 inches, not 21.5 inches. The cheapest route for us would be replacing the shafts and yokes back to the 79 style. Thanks anyway, Gary.
Brian and Ruth
From: "Gary Vogt" <teamgrumman(at)yahoo.com>
To: "Teamgrumman List" <teamgrumman-list(at)matronics.com>
Sent: Tuesday, July 17, 2012 10:36:38 AM
Subject: AG5B Yokes
I have a complete set of AG5B yokes, brackets, and nylon bushings. I thought the new owner of Travis' plane wanted them for conversion. I think Garner told Cliff they wouldn't work. Garner doesn't know that 28840 has a flat panel just like an AG5B and that they'd work just fine. So, if you want a set of AG5B yokes, I'll sell them. I had the brackets powder coated in black wrinkle. $300 and they are yours. Convert your plane to the AG5B yokes.
[quote][b]
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
|
teamgrumman(at)yahoo.com
Guest
|
| Posted: Wed Jul 18, 2012 10:06 am Post subject: AG5B Yokes |
|
|
I got a call from Brian. They are having someone change to the original yokes. And, it isn't easy.
From: Cliff Hanson <flyv35b(at)minetfiber.com>
To: teamgrumman-list(at)matronics.com
Sent: Wednesday, July 18, 2012 6:04 AM
Subject: Re: AG5B Yokes
--> TeamGrumman-List message posted by: "Cliff Hanson" <flyv35b(at)minetfiber.com (flyv35b(at)minetfiber.com)>
| Quote: | I have a complete set of AG5B yokes, brackets, and nylon bushings. I
thought the new owner of Travis' plane wanted them for conversion. I
think Garner told Cliff they wouldn't work. Garner doesn't know that
28840 has a flat panel just like an AG5B and that they'd work just fine.
So, if you want a set of AG5B yokes, I'll sell them. I had the brackets
powder coated in black wrinkle. $300 and they are yours. Convert your
plane to the AG5B yokes.
|
Gary, I'm on a motorcycle trip out in CO, etc now and haven't contacted
Brian and Ruth, but I'm sure they will want the yokes and for you to have
them powdercoated and ready to install. I'll call them and have them - The TeamGrumman-List Email Forum -
ator?TeamGrumman-List" target="_blank">http://www.matronics.com/Navigator - MATRONICS WEB FORUMS -
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
|
teamgrumman(at)yahoo.com
Guest
|
| Posted: Wed Jul 18, 2012 10:15 am Post subject: AG5B Yokes |
|
|
Brian and Ruth,
That's funny, I don't remember cutting anything down and redrilling. That would be WAAAAY to difficult to get them correct. I tried drilling new "U"-joints and getting them correct. Not fun. Maybe Travis had them cut down.
Where did you get the length dimension? The instrument panel is in the exact same location as stock. With the yokes all the way forward, it needs to hit the firewall. If 4.5 inches was cut off, I don't see how that would fit. Who knows. I'll look at the Project X plane today.
The easiest fix is the AG5B yokes. That way, you can still have all of the functions on the yokes.
Gary
From: "cloudvalley(at)comcast.net" <cloudvalley(at)comcast.net>
To: teamgrumman-list(at)matronics.com
Sent: Wednesday, July 18, 2012 6:40 AM
Subject: Re: AG5B Yokes
#yiv697050059 p {margin:0;}Hi Gary,
We found out that the shafts were only 17 inches, not 21.5 inches. The cheapest route for us would be replacing the shafts and yokes back to the 79 style. Thanks anyway, Gary.
Brian and Ruth
From: "Gary Vogt" <teamgrumman(at)yahoo.com>
To: "Teamgrumman List" <teamgrumman-list(at)matronics.com>
Sent: Tuesday, July 17, 2012 10:36:38 AM
Subject: AG5B Yokes
I have a complete set of AG5B yokes, brackets, and nylon bushings. I thought the new owner of Travis' plane wanted them for conversion. I think Garner told Cliff they wouldn't work. Garner doesn't know that 28840 has a flat panel just like an AG5B and that they'd work just fine. So, if you want a set of AG5B yokes, I'll sell them. I had the brackets powder coated in black wrinkle. $300 and they are yours. Convert your plane to the AG5B yokes.
http://www.matronics.com/Navigator?TeamG=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3DD=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D [/b][b]
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
|
cloudvalley(at)comcast.ne
Guest
|
| Posted: Wed Jul 18, 2012 1:56 pm Post subject: AG5B Yokes |
|
|
Hi Gary,
Garner gave us the specs from the Tiger spec sheet. He may have also measured them. The ones we have are 17 inches long now. The shafts in there now may have come with the yokes. We don't know.
Bought two yokes for $45 each. We can have metal plates bent and fashined to hold the buttons at the field here.
Ruth wants it changed. She was flaring and the yoke hit her clipboard; she bounced once and went around. She wants the yokes changed back now.
Thanks Gary.
Brian and Ruth
From: "Gary Vogt" <teamgrumman(at)yahoo.com>
To: teamgrumman-list(at)matronics.com
Sent: Wednesday, July 18, 2012 11:15:09 AM
Subject: Re: AG5B Yokes
Brian and Ruth,
That's funny, I don't remember cutting anything down and redrilling. That would be WAAAAY to difficult to get them correct. I tried drilling new "U"-joints and getting them correct. Not fun. Maybe Travis had them cut down.
Where did you get the length dimension? The instrument panel is in the exact same location as stock. With the yokes all the way forward, it needs to hit the firewall. If 4.5 inches was cut off, I don't see how that would fit. Who knows. I'll look at the Project X plane today.
The easiest fix is the AG5B yokes. That way, you can still have all of the functions on the yokes.
Gary
From: "cloudvalley(at)comcast.net" <cloudvalley(at)comcast.net>
To: teamgrumman-list(at)matronics.com
Sent: Wednesday, July 18, 2012 6:40 AM
Subject: Re: AG5B Yokes
#yiv697050059 p {margin:0;} Hi Gary,
We found out that the shafts were only 17 inches, not 21.5 inches. The cheapest route for us would be replacing the shafts and yokes back to the 79 style. Thanks anyway, Gary.
Brian and Ruth
From: "Gary Vogt" <teamgrumman(at)yahoo.com>
To: "Teamgrumman List" <teamgrumman-list(at)matronics.com>
Sent: Tuesday, July 17, 2012 10:36:38 AM
Subject: AG5B Yokes
I have a complete set of AG5B yokes, brackets, and nylon bushings. I thought the new owner of Travis' plane wanted them for conversion. I think Garner told Cliff they wouldn't work. Garner doesn't know that 28840 has a flat panel just like an AG5B and that they'd work just fine. So, if you want a set of AG5B yokes, I'll sell them. I had the brackets powder coated in black wrinkle. $300 and they are yours. Convert your plane to the AG5B yokes.
http://www.matronics.com/Navigator?TeamG=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3DD=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D [/b][quote]
[b]
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
