davidjoyce(at)doctors.org
Guest
|
 Posted: Sun Jul 22, 2012 6:02 am Post subject: Weight of HPL 3 blade warp drive prop for ref |
 |
|
Graeme, You want to adjust the fine limit to give you a
max static of 5650 . Significantly less will lose you some
power & more will put you at risk of over speeding if you
slam the throttle open in a go around situation. The
coarse stop will probably look after itself but you need
to be able to get a positive rate of climb at MAUW and
fully coarse. Adjusting the stops is not at all difficult.
Woodcomp will give you instructions if you ask them, or if
here are any problems I can probably find the instructions
they gave me.
Regards, David, G-XSDJ
On Sun, 22 Jul 2012 01:40:57 -0700
"graeme bird" <graeme(at)gdbmk.co.uk> wrote:
| Quote: |
<graeme(at)gdbmk.co.uk>
Well I have fitted to Woodcomp 3000/3W and done a couple
of short initial test flights. The LAA test schedule
seems to imply that I might need to adjust the
microswitch positions but the Woodcomp manual says this
should only be done at the factory. Did anyone find it
necessary to adjust them and if so did they do it
themselves of get Kevin involved? I guess I am asking
Carl and David.
So far the take off seems much more rapid, but then it
seemed to stop accelerating at just above 60kts and I
have to go to climb and put the gear up. The top end
doesnt seem that much faster but then I may not have been
applying full power. Not sure whether to display pressure
or HP on the controller.
--------
Graeme Bird
G-UMPY
Mono Classic/XS FWFD 912ULS/Warp drive FP
Newby: 35 hours
g(at)gdbmk.co.uk
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=378909#378909
Un/Subscription,
Forums!
Admin.
|
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
