Matronics Email Lists :: View topic - Mono Master Brake cylinder

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Mono Master Brake cylinder

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

rehn(at)rockisland.com
Guest

Posted: Wed Aug 15, 2012 4:13 pm Post subject: Mono Master Brake cylinder

I had a small leak at the hose fitting of the master cylinder. At a distant airport a good Samaritan helped me out as I now had no brake. Tightened up the fitting and put about a half once of fluid in and all was good. Except it was the red aircraft fluid. Worked good and got me home. I flushed out the fluid and refilled with Dot 4 and flushed a couple more times. All seems to be ok but I wonder if I messed up a seal? I believe the bad stuff was just up at the master because the line down was still full. The master only has a small "reservoir" so very little fluid is in there. The wrong fluid was in less then 24 hours. All thoughts and recommendations appreciated. 

And if I need to rebuild where might I get parts?

Thanks

Jerry

Mono 914

Sent from my iPad

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum