Matronics Email Lists :: View topic - Russian MTV Propeller Pitch

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Russian MTV Propeller Pitch

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

pjsales(at)me.com
Guest

Posted: Thu Sep 06, 2012 2:51 pm Post subject: Russian MTV Propeller Pitch

I have a Russian built MTV-9-B-C prop on my Yak-18T, with Russian governor.  At cruise MP of "6", I cannot get the RPM less than 72% in level flight, and it goes up to 80% in the descent.  Anyone have any ideas?  Thanks,



PJ

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

dsavarese0812(at)bellsout
Guest

Posted: Thu Sep 06, 2012 5:29 pm Post subject: Russian MTV Propeller Pitch

PJ,

I believe the MTV Prop requires a stronger spring in the prop governor.  

Please contact the MTV folks in Florida (can't remember where in Florida 

though) and ask them about it.

Dennis



A. Dennis Savarese

334-285-6263

334-546-8182 (mobile)

www.yak-52.com

Skype - Yakguy1



On 9/6/2012 5:49 PM, Patrick Ashura wrote:

 	  Quote: 	
		   



 I have a Russian built MTV-9-B-C prop on my Yak-18T, with Russian governor.  At cruise MP of "6", I cannot get the RPM less than 72% in level flight, and it goes up to 80% in the descent.  Anyone have any ideas?  Thanks,



 PJ

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

viperdoc(at)mindspring.co
Guest

Posted: Thu Sep 06, 2012 5:55 pm Post subject: Russian MTV Propeller Pitch

Kimble



Sent from my iPad



On Sep 6, 2012, at 8:27 PM, "A. Dennis Savarese" <dsavarese0812(at)bellsouth.net> wrote:



 	  Quote: 	
		   

 

 PJ,

 I believe the MTV Prop requires a stronger spring in the prop governor.  Please contact the MTV folks in Florida (can't remember where in Florida though) and ask them about it.

 Dennis

 

 A. Dennis Savarese

 334-285-6263

 334-546-8182 (mobile)

 www.yak-52.com

 Skype - Yakguy1

 

 On 9/6/2012 5:49 PM, Patrick Ashura wrote:

> 

> 

> I have a Russian built MTV-9-B-C prop on my Yak-18T, with Russian governor.  At cruise MP of "6", I cannot get the RPM less than 72% in level flight, and it goes up to 80% in the descent.  Anyone have any ideas?  Thanks,

> 

> PJ

> 

> 

> 

> 

>

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

richard.goode(at)russiana
Guest

Posted: Thu Sep 06, 2012 6:20 pm Post subject: Russian MTV Propeller Pitch

MT will have nothing to do with the Russian props since they were cheated on

royalties that were due!!

So it is a major problem to get these props overhauled.



Richard Goode



Rhodds Farm 

Lyonshall 

Hereford 

HR5 3LW 

United Kingdom 

 Tel: +94 (0) 81 241 5137 (Sri Lanka)

Tel:   +44 (0) 1544 340120 

Fax:  +44 (0) 1544 340129 

www.russianaeros.com

I'm currently in Sri Lanka but this Mail is working,and my local phone is

+94 779 132 160.

--

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

mark.bitterlich(at)navy.m
Guest

Posted: Fri Sep 07, 2012 9:56 am Post subject: Russian MTV Propeller Pitch

I went through a long and drawn out discussion with MT directly

concerning this issue and strongly confirm what Richard said in his

message.  



Mark Bitterlich

--

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum