 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
pdelano(at)telus.net
Guest
|
 Posted: Thu Oct 11, 2012 5:46 am Post subject: Center Hinge Elevator |
 |
|
Hello all,
With the elevator spaced back the 7mm from the back of the stab, stab level and elevator neutral it does not appear as though the center hinge hole on the stabilizer bracket and elevator bracket will line up. It appears I will need to shim the bracket attached to the horizontal stab back to get alignment longitudinally. Vertical misalignment can probably be adjusted for by raising or lowering the elevator slightly. I am nervous I am going to get jamming of the elevator if any misalignment exists with the two outboard hinge and the center hinge holes. Any advice would be greatly appreciated.
Regards,
Perry
[quote][b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
 |
rdivany(at)hotmail.com
Guest
|
| Posted: Thu Oct 11, 2012 6:28 pm Post subject: Center Hinge Elevator |
|
|
Perry,
Not sure if you're having a similar issue as I did without photos of the misalignment, but what happened in my case (a CH701) was that part #7H3-3-SP was bent the wrong direction and was actually a mirror image of what it was supposed to be. The angle is NOT symmetrical, and caused a misalignment up and down. Don't remember now whether it was too high or too low. Anyway, called Zenith and they sent a replacement bent the correct way. Please see attached photos. Hope this helps.
Regards,
Richard
From: pdelano(at)telus.net
To: zenith701801-list(at)matronics.com
Subject: Center Hinge Elevator
Date: Thu, 11 Oct 2012 06:45:48 -0700
Hello all,
With the elevator spaced back the 7mm from the back of the stab, stab level and elevator neutral it does not appear as though the center hinge hole on the stabilizer bracket and elevator bracket will line up. It appears I will need to shim the bracket attached to the horizontal stab back to get alignment longitudinally. Vertical misalignment can probably be adjusted for by raising or lowering the elevator slightly. I am nervous I am going to get jamming of the elevator if any misalignment exists with the two outboard hinge and the center hinge holes. Any advice would be greatly appreciated.
Regards,
Perry
| Quote: |
-List" target="_blank">http://www.matronics.com/Navigator?Zenith701801-List
http://forums.matronics.com
="_blank">http://www.matronics.com/contribution
|
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
| Description: |
|
| Filesize: |
67.58 KB |
| Viewed: |
1978 Time(s) |
|
| Description: |
|
| Filesize: |
57.77 KB |
| Viewed: |
1978 Time(s) |
|
| Description: |
|
| Filesize: |
63.26 KB |
| Viewed: |
1978 Time(s) |
|
|
|
| Back to top |
|
|
pdelano(at)telus.net
Guest
|
| Posted: Sat Oct 20, 2012 11:25 am Post subject: Center Hinge Elevator |
|
|
Hi Richard,
Mine seemed to be bent the right way. And per my earlier message to Tommy all seems to be fine. Although the elevator skin is still a mystery what way it was bent. Between Caleb and myself we sorted out a fix for that.
Regards,
Perry
Sent wirelessly from my BlackBerry device on the Bell network.
Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell.
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
