Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Baffling tip

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

woxofswa

Joined: 12 Aug 2008
Posts: 349
Location: AZ

Posted: Fri Nov 09, 2012 10:42 am Post subject: Baffling tip

This is either a baffling tip or a tip on baffling depending on the merit of my idea.



Whilst dealing with piece DC-1001A, the forward part that goes around the prop governor, I found myself having to remove quite a lot of material to be able to get it on and off around the PG.  I had to flex the back wall behind the governor quite a bit and was worried about a crack forming there.  My installation is a little more complicated in that area because of mods necessary for my A/C installation.  Anyway, I came up with the idea to put a small piece of scrap hinge on the back wall to allow the hole around the PB to "open up" during removal and installation.  I wish I would have thought of it sooner as I could have removed a lot less material.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Myron Nelson
Mesa, AZ
Flew May 10 2014

rv10free2fly(at)yahoo.com
Guest

Posted: Fri Nov 09, 2012 12:21 pm Post subject: Baffling tip

Any pictures please Myron?

Warm regards



Patrick from Oz



On 10/11/2012, at 5:12 AM, "woxofswa" <woxof(at)aol.com> wrote:



 	  Quote: 	
		   

 

 This is either a baffling tip or a tip on baffling depending on the merit of my idea.

 

 Whilst dealing with piece DC-1001A, the forward part that goes around the prop governor, I found myself having to remove quite a lot of material to be able to get it on and off around the PG.  I had to flex the back wall behind the governor quite a bit and was worried about a crack forming there.  My installation is a little more complicated in that area because of mods necessary for my A/C installation.  Anyway, I came up with the idea to put a small piece of scrap hinge on the back wall to allow the hole around the PB to "open up" during removal and installation.  I wish I would have thought of it sooner as I could have removed a lot less material.  

 

 

 --------

 Myron Nelson

 Mesa, AZ

 Emp completed, QB wings completed, legacy build fuse on gear.  Finishing kit and FWF kit in progress.

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=387385#387385

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum