Matronics Email Lists :: View topic - Fuel hose size spec with FloScan / 912

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Fuel hose size spec with FloScan / 912

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

nimbusaviation(at)YAHOO.C
Guest

Posted: Mon Nov 05, 2012 6:12 am Post subject: Fuel hose size spec with FloScan / 912

We are taking advantage of extended down-time to swap out, and fire-sleeve, all the forward fuel hose per 5 year recommendation. I need to check that we have the correct hose size spec' as I cannot locate the latest published layout on-line.



As we found it, 8mm ID hose runs to the mechanical pump then back to the FloScan and downstream of it to the first (s/b) Carb Tee. Beyond that, 6mm hose. We have build and update paperwork to show this spec. However, offering up 8mm hose to the pump outlet fitting it is a worryingly loose fit until the clamp is tightened. 



Are we happy with this?



Glenn Rainey / Martin Burns

Classic 912 M/W

Cumbernauld

EGPG

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum