 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
byoungplumbing(at)gmail.c
Guest
|
 Posted: Mon Nov 19, 2012 7:18 am Post subject: penetrating oil |
 |
|
ok how long do you have to let it soak to get this kind of results?
boyd young
>>>>>>>>>>>>>>>>>>>>>
No Oil used ................... 516 pounds
WD-40 .................... ... 238 pounds
PB Blaster .................... 214 pounds
Liquid Wrench ...............127 pounds
Kano Kroil ................... 106 pounds
ATF*-Acetone mix............53 pounds
The ATF-Acetone mix is a "home brew" mix of 50 - 50 automatic
transmission fluid and acetone. Note this "home brew" released bolts
better than any commercial product in this one particular test.
[quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
 |
herbgh(at)nctc.com
Guest
|
| Posted: Mon Nov 19, 2012 7:25 am Post subject: penetrating oil |
|
|
how about marvel mystery oil and acetone?? Herb
At 09:18 AM 11/19/2012, you wrote:
[quote]ok how long do you have to let it soak to get this kind of results?
boyd young
>>>>>>>>>>>>>>>>>>>>>
No Oil used ................... 516 pounds
WD-40 ..................... ... 238 pounds
PB Blaster .................... 214 pounds
Liquid Wrench ...............127 pounds
Kano Kroil .................... 106 pounds
ATF*-Acetone mix............53 pounds
The ATF-Acetone mix is a "home brew" mix of 50 - 50 automatic
transmission fluid and acetone. Note this "home brew" released bolts
better than any commercial product in this one particular test.
[b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
ceengland7(at)gmail.com
Guest
|
| Posted: Mon Nov 19, 2012 11:15 am Post subject: penetrating oil |
|
|
In my case, I really don't remember how long I let them 'soak'. However, I doubt that I waited that long. After all, the Acetone will evaporate fairly quickly. I won't speculate on why it works, but it does work.
Charlie
On 11/19/2012 09:18 AM, b young wrote:
[quote] ok how long do you have to let it soak to get this kind of results?
boyd young
>>>>>>>>>>>>>>>>>>>>>
No Oil used ................... 516 pounds
WD-40 ..................... ... 238 pounds
PB Blaster .................... 214 pounds
Liquid Wrench ...............127 pounds
Kano Kroil .................... 106 pounds
ATF*-Acetone mix............53 pounds
The ATF-Acetone mix is a "home brew" mix of 50 - 50 automatic
transmission fluid and acetone. Note this "home brew" released bolts
better than any commercial product in this one particular test.
[b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
ceengland7(at)gmail.com
Guest
|
|
| Back to top |
|
|
koxxy
Joined: 19 Oct 2011
Posts: 28
Location: Beaverton, OR
|
| Posted: Mon Nov 19, 2012 1:08 pm Post subject: penetrating oil |
|
|
Thanks for the tip, Charlie. Most of us will have ATF fluid around (even used should work), but I wonder if fingernail polish remover could sub for acetone?
On Mon, Nov 19, 2012 at 11:16 AM, Charlie England <ceengland7(at)gmail.com (ceengland7(at)gmail.com)> wrote:
[quote] Why? (Just to spend more money??) 
On 11/19/2012 09:25 AM, Herb Gayheart wrote:
| Quote: | how about marvel mystery oil and acetone?? Herb
At 09:18 AM 11/19/2012, you wrote:
| Quote: | ok how long do you have to let it soak to get this kind of results?
boyd young
>>>>>>>>>>>>>>>>>>>>>
No Oil used ................... 516 pounds
WD-40 ..................... ... 238 pounds
PB Blaster .................... 214 pounds
Liquid Wrench ...............127 pounds
Kano Kroil .................... 106 pounds
ATF*-Acetone mix............53 pounds
The ATF-Acetone mix is a "home brew" mix of 50 - 50 automatic
transmission fluid and acetone. Note this "home brew" released bolts
better than any commercial product in this one particular test.
|
|
| Quote: |
_blank">www.aeroelectric.com
.com" target="_blank">www.buildersbooks.com
="_blank">www.homebuilthelp.com
_blank">http://www.matronics.com/contribution
get="_blank">http://www.matronics.com/Navigator?Kolb-List
tp://forums.matronics.com
|
[b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
Dana
Joined: 13 Dec 2007
Posts: 1047
Location: Connecticut, USA
|
| Posted: Mon Nov 19, 2012 1:46 pm Post subject: penetrating oil |
|
|
At 04:08 PM 11/19/2012, Martin Koxxy wrote:
| Quote: | | Thanks for the tip, Charlie. Most of us will have ATF fluid around (even used should work), but I wonder if fingernail polish remover could sub for acetone? |
Sure, it'll be a _lovely_ flowery smelling bolt loosener!
Actually, though traditional nail polish remover used to be acetone, I don't think the stuff sold nowadays is always acetone any more.
-Dana
--
Why did the chicken cross the Mobius strip? To get to the other, er, um....
[quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
herbgh(at)nctc.com
Guest
|
| Posted: Mon Nov 19, 2012 2:48 pm Post subject: penetrating oil |
|
|
On 11/19/2012 02:16 PM, Charlie England wrote:
[quote] Why? (Just to spend more money??)
On 11/19/2012 09:25 AM, Herb Gayheart wrote:
| Quote: | how about marvel mystery oil and acetone?? Herb
At 09:18 AM 11/19/2012, you wrote:
| Quote: | ok how long do you have to let it soak to get this kind of results?
boyd young
>>>>>>>>>>>>>>>>>>>>>
No Oil used ................... 516 pounds
WD-40 ..................... ... 238 pounds
PB Blaster .................... 214 pounds
Liquid Wrench ...............127 pounds
Kano Kroil .................... 106 pounds
ATF*-Acetone mix............53 pounds
The ATF-Acetone mix is a "home brew" mix of 50 - 50 automatic
transmission fluid and acetone. Note this "home brew" released bolts
better than any commercial product in this one particular test.
|
|
Just thought the experiment migh show some superior qualities of the Marvey oil....Herb
[b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
Richard Pike
Joined: 09 Jan 2006
Posts: 1670
Location: Blountville, Tennessee
|
| Posted: Tue Nov 20, 2012 7:14 am Post subject: Re: penetrating oil |
|
|
Just speculating, methinks the acetone works as a very thin solvent that facilitates the lubricant working it's way into the rusted joint. So for the Kolb list: MEK? Wouldn't it work like acetone? All us Kolbers probably still have some, and now that the airplane is built, this might be a use for it.
Worth a try - but don't get it on the paint.
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0
Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
