Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Zenith701801-List Digest: 2 Msgs - 11/25/12

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith701801-List
View previous topic :: View next topic  
Author Message
Firefoxes



Joined: 09 Jan 2007
Posts: 5
Location: Redding California

PostPosted: Mon Nov 26, 2012 6:57 pm    Post subject: Zenith701801-List Digest: 2 Msgs - 11/25/12 Reply with quote

Yes there are much better ways to do the controls concerning the torque tube system.

In a message dated 11/26/2012 12:04:23 A.M. Pacific Standard Time, zenith701801-list(at)matronics.com writes:
Quote:
*

=========================
Online Versions of Today's List Digest Archive
=========================

Today's complete Zenith701801-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith701801-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.

HTML Version:

http://www.matronics.com/digest/digestview.php?Style=37461&View=html&Chapter=2012-11-25&Archive=Zenith701801

Text Version:

http://www.matronics.com/digest/digestview.php?Style=37461&View=txt&Chapter=2012-11-25&Archive=Zenith701801
=======================
  EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
  Zenith701801-List Digest Archive
    ---
  Total Messages Posted Sun 11/25/12: 2
----------------------------------------------------------
Today's Message Index:
----------------------

1. 11:38 AM - Re: 701 Fuel system (bobmccully)
2. 03:15 PM - Re: Re: 701 Fuel system (NYTerminat(at)aol.com)

________________________________  Message 1 _____________________________________
Time: 11:38:30 AM PST US
Subject: Re: 701 Fuel system
From: "bobmccully" <minisalways(at)shaw.ca>
Hello I am very new to this forum. I have built a CH701 and it has been test flown
with no major issues but I am wondering about those gas tank caps. Do they
vent properly? Do they allow even flow distribution? Or, should I be looking
for a better option?

Also, I too was not happy with the original setup for the bellcrank/torque tube.
I used the example from the Zenair newsletter that a builder submitted and I
have to say that it works great. Wonder if Zenair could adopt it as the new standard
bob

--------
not sure what this is?
Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=388926#388926
________________________________ Message 2 _____________________________________
Time: 03:15:09 PM PST US
From: NYTerminat(at)aol.com
Subject: Re: Re: 701 Fuel system

I put on snorkel caps that has a pitot tube that faces front. Make sure if
using your standard Zenith caps, that you have drilled the extra holes in
them according to the dwgs.

There is nothing wrong with the Zenith touque tube.
In a message dated 11/25/2012 2:38:38 P.M. Eastern Standard Time,
minisalways(at)shaw.ca writes:

--> Zenith701801-List message posted by: "bobmccully"
<minisalways(at)shaw.ca>

Hello I am very new to this forum. I have built a CH701 and it has been
test flown with no major issues but I am wondering about those gas tank
caps. Do they vent properly? Do they allow even flow distribution? Or, should
I
be looking for a better option?

Also, I too was not happy with the original setup for the bellcrank/torque
tube. I used the example from the Zenair newsletter that a builder
submitted and I have to say that it works great. Wonder if Zenair could adopt
it
as the new standard
bob

--------
not sure what this is?
Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=388926#388926< bsp; (And Get Some AWESOME FREE o find ifts bsp; lder's LP you for ; -Matt Dralle, List = Use ilities ay - MATRONICS WEB FORUMS



[quote][b]


- The Matronics Zenith701801-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List
Back to top
View user's profile Send private message
JohnDRead(at)aol.com
Guest





PostPosted: Mon Nov 26, 2012 7:26 pm    Post subject: Zenith701801-List Digest: 2 Msgs - 11/25/12 Reply with quote

Hi Guys,
 Where is the info regarding the torque tube system? Thanks.

Regards, John

CH701 - Colorado - Jabiru 3300

Cell: 719-494-4567
Home: 303-648-3261
In a message dated 11/26/2012 7:57:25 P.M. Mountain Standard Time, Dougnoble(at)aol.com writes:
Quote:
Yes there are much better ways to do the controls concerning the torque tube system.

In a message dated 11/26/2012 12:04:23 A.M. Pacific Standard Time, zenith701801-list(at)matronics.com writes:
Quote:
*

=========================
Online Versions of Today's List Digest Archive
=========================

Today's complete Zenith701801-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith701801-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.

HTML Version:

http://www.matronics.com/digest/digestview.php?Style=37461&View=html&Chapter=2012-11-25&Archive=Zenith701801

Text Version:

http://www.matronics.com/digest/digestview.php?Style=37461&View=txt&Chapter=2012-11-25&Archive=Zenith701801
=======================
  EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
  Zenith701801-List Digest Archive
    ---
  Total Messages Posted Sun 11/25/12: 2
----------------------------------------------------------
Today's Message Index:
----------------------

1. 11:38 AM - Re: 701 Fuel system (bobmccully)
2. 03:15 PM - Re: Re: 701 Fuel system (NYTerminat(at)aol.com)

________________________________  Message 1 _____________________________________
Time: 11:38:30 AM PST US
Subject: Re: 701 Fuel system
From: "bobmccully" <minisalways(at)shaw.ca>
Hello I am very new to this forum. I have built a CH701 and it has been test flown
with no major issues but I am wondering about those gas tank caps. Do they
vent properly? Do they allow even flow distribution? Or, should I be looking
for a better option?

Also, I too was not happy with the original setup for the bellcrank/torque tube.
I used the example from the Zenair newsletter that a builder submitted and I
have to say that it works great. Wonder if Zenair could adopt it as the new standard
bob

--------
not sure what this is?
Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=388926#388926
________________________________ Message 2 _____________________________________
Time: 03:15:09 PM PST US
From: NYTerminat(at)aol.com
Subject: Re: Re: 701 Fuel system

I put on snorkel caps that has a pitot tube that faces front. Make sure if
using your standard Zenith caps, that you have drilled the extra holes in
them according to the dwgs.

There is nothing wrong with the Zenith touque tube.
In a message dated 11/25/2012 2:38:38 P.M. Eastern Standard Time,
minisalways(at)shaw.ca writes:

--> Zenith701801-List message posted by: "bobmccully"
<minisalways(at)shaw.ca>

Hello I am very new to this forum. I have built a CH701 and it has been
test flown with no major issues but I am wondering about those gas tank
caps. Do they vent properly? Do they allow even flow distribution? Or, should
I
be looking for a better option?

Also, I too was not happy with the original setup for the bellcrank/torque
tube. I used the example from the Zenair newsletter that a builder
submitted and I  have to say that it works great. Wonder if Zenair could adopt
it
as the new standard
bob

--------
not sure what this  is?
Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=388926#388926< bsp; (And Get Some AWESOME FREE o find ifts bsp; lder's LP you for ; -Matt Dralle, List = Use ilities ay - MATRONICS WEB FORUMS



Quote:


tp://www.aeroelectric.com/">www.aeroelectric.com
/ href="http://www.buildersbooks.com/">www.buildersbooks.com
http://www.homebuilthelp.com/">www.homebuilthelp.com
p://www.matronics.com/contribution">http://www.matronics.com/contribution
ist href="http://www.matronics.com/Navigator?Zenith701801-List">http://www.matronics.com/Navigator?Zenith701801-List
s.matronics.com/">http://forums.matronics.com



[quote][b]


- The Matronics Zenith701801-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith701801-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group