 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
frank goodnight
Joined: 27 Dec 2011
Posts: 126
|
 Posted: Sat Dec 15, 2012 4:44 pm Post subject: 912 over heating |
 |
|
[img]cid:1355616617161(at)dclient.mail.yahoo.com[/img] Hello 701 builders and flyers'
Just finished my 701 , about a hour and a half
flight time.
Have a problem with overheating --912 ULS--
that came off a Titan Tornado.Engine is in good shape 800 hrs.
When trying to fly around the pattern the CHT will
trend towards overheat about, half way around I aborted at 270 F , the oil temp
also looks like it would over temp--250 F and going up
After landing the temps continue to go up as I tried to idle
and cool down. Removed the cowling and flew at various
power settings and speeds for about an hour.All temps are normal--
oil (at)235F--CHT(at)around 200F.
Another 912 uls user told me that when he first started up he had a over heat problem that was caused by a air bubble trapped in the
water circuit that worked itself out over time.
I would like to hear from any one that has had similar
problem. Or know what might be causing it , and best of all the cure.Thanks
Frank Goodnight
Fayetteville Arkansas
Kolb Firestar--HKS engine 200+ hrs.
Zenith 701-- 912 ULS engine 1+ hrs
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
| Description: |
|
| Filesize: |
12.03 KB |
| Viewed: |
4655 Time(s) |
|
|
|
| Back to top |
|
 |
john.marzulli(at)gmail.co
Guest
|
| Posted: Sat Dec 15, 2012 9:06 pm Post subject: 912 over heating |
|
|
What cowling are you using? Do you have enough of the radiator exposed? Any pictures you can share?
With the newer style 701 cowling my plane suffers from low oil & CHTs this time of year. The entire radiator and oil cooler are covered in aluminum tape.
John Marzulli
http://MarzulliPhoto.net/
http://701Builder.blogspot.com/
On Sat, Dec 15, 2012 at 4:44 PM, frank goodnight <frank.goodnight(at)att.net (frank.goodnight(at)att.net)> wrote:
| Quote: | [img]cid:1355616617161(at)dclient.mail.yahoo.com[/img] Hello 701 builders and flyers'
Just finished my 701 , about a hour and a half
flight time.
Have a problem with overheating --912 ULS--
that came off a Titan Tornado.Engine is in good shape 800 hrs.
When trying to fly around the pattern the CHT will
trend towards overheat about, half way around I aborted at 270 F , the oil temp
also looks like it would over temp--250 F and going up
After landing the temps continue to go up as I tried to idle
and cool down. Removed the cowling and flew at various
power settings and speeds for about an hour.All temps are normal--
oil (at)235F--CHT(at)around 200F.
Another 912 uls user told me that when he first started up he had a over heat problem that was caused by a air bubble trapped in the
water circuit that worked itself out over time.
I would like to hear from any one that has had similar
problem. Or know what might be causing it , and best of all the cure.Thanks
Frank Goodnight
Fayetteville Arkansas
Kolb Firestar--HKS engine 200+ hrs.
Zenith 701-- 912 ULS engine 1+ hrs
|
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
| Description: |
|
| Filesize: |
12.03 KB |
| Viewed: |
4653 Time(s) |
|
|
|
| Back to top |
|
|
frank goodnight
Joined: 27 Dec 2011
Posts: 126
|
| Posted: Sun Dec 16, 2012 5:33 am Post subject: 912 over heating |
|
|
From: John Marzulli <john.marzulli(at)gmail.com>
To: zenith701801-list(at)matronics.com
Sent: Sat, December 15, 2012 11:06:14 PM
Subject: Re: 912 over heating
What cowling are you using? Do you have enough of the radiator exposed? Any pictures you can share?
With the newer style 701 cowling my plane suffers from low oil & CHTs this time of year. The entire radiator and oil cooler are covered in aluminum tape.
John Marzulli
http://MarzulliPhoto.net/
http://701Builder.blogspot.com/
Hi John,
Thanks for your reply.
Don't know for sure what cowling I have got . I bought it from Zenith in September,
told them it was for a 912 bed mount. The radiator and oil cooler are the ones that came off
the Titan the oil cooler is piggy backed on the radiator , Flew that way on the titan for over
800 hrs. But the engine was exposed --un cowled in that app.
The coolers are about 1 inch behind the prop, and the top is about 2 inches below the
shaft. right in the center of the hole in the cowing. Can't send pictures today, possibly
later .--Have to get a friend to do it for me.
Thanks for any thoughts you --or anyone else may have.
Frank
On Sat, Dec 15, 2012 at 4:44 PM, frank goodnight <frank.goodnight(at)att.net (frank.goodnight(at)att.net)> wrote:
| Quote: | [img]cid:1.1726401788(at)web181003.mail.ne1.yahoo.com[/img] Hello 701 builders and flyers'
Just finished my 701 , about a hour and a half
flight time.
Have a problem with overheating --912 ULS--
that came off a Titan Tornado.Engine is in good shape 800 hrs.
When trying to fly around the pattern the CHT will
trend towards overheat about, half way around I aborted at 270 F , the oil temp
also looks like it would over temp--250 F and going up
After landing the temps continue to go up as I tried to idle
and cool down. Removed the cowling and flew at various
power settings and speeds for about an hour.All temps are normal--
oil (at)235F--CHT(at)around 200F.
Another 912 uls user told me that when he first started up he had a over heat problem that was caused by a air bubble trapped in the
water circuit that worked itself out over time.
I would like to hear from any one that has had similar
problem. Or know what might be causing it , and best of all the cure.Thanks
Frank Goodnight
Fayetteville Arkansas
Kolb Firestar--HKS engine 200+ hrs.
Zenith 701-- 912 ULS engine 1+ hrs
|
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
| Description: |
|
| Filesize: |
12.03 KB |
| Viewed: |
4644 Time(s) |
|
|
|
| Back to top |
|
|
walt.cannon(at)boeing.com
Guest
|
| Posted: Sun Dec 16, 2012 8:53 am Post subject: 912 over heating |
|
|
Frank,
I had a overheat problem on my 2003 era CH701 / 912S when I first started flying. It turns out that I had plenty of radiator and oil cooler exposed on the inlet side, but not enough cowl air exhaust opening to let the air our the bottom. I trimmed the opening larger around the muffler area and the increased flow dropped the temps drastically.
Walt Cannon
Seattle
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
john.marzulli(at)gmail.co
Guest
|
| Posted: Sun Dec 16, 2012 9:45 am Post subject: 912 over heating |
|
|
If it is the "bed mount" than you have the older style cowling.John Marzulli
http://MarzulliPhoto.net/
http://701Builder.blogspot.com/
On Sun, Dec 16, 2012 at 8:54 AM, Cannon, Walt <walt.cannon(at)boeing.com (walt.cannon(at)boeing.com)> wrote:
[quote] --> Zenith701801-List message posted by: "Cannon, Walt" <walt.cannon(at)boeing.com (walt.cannon(at)boeing.com)>
Frank,
I had a overheat problem on my 2003 era CH701 / 912S when I first started flying. It turns out that I had plenty of radiator and oil cooler exposed on the inlet side, but not enough cowl air exhaust opening to let the air our the bottom. I trimmed the opening larger around the muffler area and the increased flow dropped the temps drastically.
Walt Cannon
Seattle
===========
="_blank">www.aeroelectric.com
ooks.com" target="_blank">www.buildersbooks.com
et="_blank">www.homebuilthelp.com
="_blank">http://www.matronics.com/contribution
le, List Admin.
===========
-List" target="_blank">http://www.matronics.com/Navigator?Zenith701801-List
===========
http://forums.matronics.com
===========
[b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
jf3sb
Joined: 02 Dec 2007
Posts: 20
Location: Olathe, KS
|
| Posted: Mon Dec 17, 2012 8:41 pm Post subject: Re: 912 over heating |
|
|
I don't claim to be an expert, but I suspect it would take something fairly drastic like air in an oil line to create the symptoms you described. I've got a 912S with a newer-style cowl and it will just get to maybe 235F if I let it toward the end of a near full-power climbout on a hot (100F on the ground day). What you describe is a lot more drastic than that.
If so, maybe it fixed itself after it cooled off on the ground and the problem is solved. But I think I'd take the appropriate hoses off at the top end, shake the hoses around to free up any bubbles caught in the bends, and carefully fill the hose with oil before reconnecting.
Getting the engine to warm up in cooler temps has been the bigger problem. I finally make a pretty simple slider gate that fits over the oil cooler (between it and the fiberglass hood) thats controlled from the cockpit. Works -great-, kind of like a cowl flap. Much faster warmup time and keeps the engine warm when tooling around slow on a cold day.
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
frank goodnight
Joined: 27 Dec 2011
Posts: 126
|
| Posted: Tue Dec 18, 2012 4:55 am Post subject: 912 over heating |
|
|
jf3sb Thanks for your input , Will try what you have suggested.
Frank
do not archive
From: jf3sb <jf3sb(at)yahoo.com>
To: zenith701801-list(at)matronics.com
Sent: Mon, December 17, 2012 10:42:08 PM
Subject: Re: 912 over heating
--> Zenith701801-List message posted by: "jf3sb" <jf3sb(at)yahoo.com (jf3sb(at)yahoo.com)>
I don't claim to be an expert, but I suspect it would take something fairly drastic like air in an oil line to create the symptoms you described. I've got a 912S with a newer-style cowl and it will just get to maybe 235F if I let it toward the end of a near full-power climbout on a hot (100F on the ground day). What you describe is a lot more drastic than that.
If so, maybe it fixed itself after it cooled off on the ground and the problem is solved. But I think I'd take the appropriate hoses off at the top end, shake the hoses around to free up any bubbles caught in the bends, and carefully fill the hose with oil before reconnecting.
Getting the engine to warm up in cooler temps has been the bigger problem. I finally make a pretty simple
[quote][b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
