nuckolls.bob(at)aeroelect Guest
|
Posted: Fri Jan 04, 2013 9:33 am Post subject: Advisability of using anti-corrosion lubricant on conta |
|
|
At 10:06 AM 1/4/2013, you wrote:
Quote: | Greetings Bob,
May I suggest that you try "3M Marine Adhesive Sealant 5200" instead of RTV for your tests. I have used it under many fittings above and below the waterline on boats with excellent results. They also make a 4200 that is easier to remove which might be more appropriate for antenna installations. |
Good info. Actually, there are a host of
suitable sealants. In this case, cured sealant
exposed to the environment is a very thin
'gasket edge' that is quite protected. I
rather suspect that any quality caulking
compound would suffice. I thought of EGRTV
only because it's stuff I have around and
I KNOW it to be non-corrosive . . . unlike
similar products with the smell of acetic
acid.
What ever we test should be something that
a builder can readily acquire at low cost.
Hardware store acrylic caulk seems an attractive
alternative.
Bob . . . [quote][b]
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|