 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Tim Olson
Joined: 25 Jan 2007
Posts: 2879
|
 Posted: Mon Feb 04, 2013 2:53 pm Post subject: RV-List: Re: Fwd: [MARKETING] VP-200/Dynon SkyView Service B |
 |
|
I'm just glad my circuit breakers are still at release 1.0a firmware.
Saved me tons of time over the years with software revs on attached devices.
Tim
On Feb 4, 2013, at 4:01 PM, "Pascal" wrote:
[quote] According to Dynon Support -We only moved a few parameters around in the new serial stream, so it's unfortunate that it will take them months to fix this as it's likely just a few constants in their code to make it work again.
Hopefully “We are investigating the issue and will have additional details in the future.” means they may release a fix much sooner than the expected Q2 that I was told last Friday. Granted this should not be VP issue, kudos, to Marc for at least providing a fix, even if it is a potential long wait.
From: Kelly McMullen (kellym(at)aviating.com)
Sent: Monday, February 04, 2013 12:50 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com) ; rv-list(at)matronics.com (rv-list(at)matronics.com)
Subject: Fwd: [MARKETING] VP-200/Dynon SkyView Service Bulletin
Well, at least Vertical Power is listening.
------
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
rv10flyer(at)live.com
Guest
|
| Posted: Mon Feb 04, 2013 3:30 pm Post subject: RV-List: Re: Fwd: [MARKETING] VP-200/Dynon SkyView Service B |
|
|
Truthfully this is not a circuit breaker rev issue it’s a flight modes issue. To put this in perspective the VP-x, which is the circuit breaker is not “broke” has worked from day one and is not impacted by the dynon upgrade. With the VP-200 it adds a whole lot more safety than your rev 1.0a, the modes automatically kick in when a Emergency is sensed, if there is an electrical failure, it identifies the issue, shuts it down and will even go into a pre planned shutdown list to eliminate a fire, same with engine out, preset boost and checklist appears on steps to follow. It was all working and the circuit breaker piece continues to work regardless of the Dynon improvements, it’s the modes and engine information that one needs “correction” or it is lost.
From: Tim Olson (Tim(at)MyRV10.com)
Sent: Monday, February 04, 2013 2:52 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: RV-List: Re: Fwd: [MARKETING] VP-200/Dynon SkyView Service Bulletin
I'm just glad my circuit breakers are still at release 1.0a firmware.
Saved me tons of time over the years with software revs on attached devices.
Tim
On Feb 4, 2013, at 4:01 PM, "Pascal" wrote:
[quote] According to Dynon Support -We only moved a few parameters around in the new serial stream, so it's unfortunate that it will take them months to fix this as it's likely just a few constants in their code to make it work again.
Hopefully “We are investigating the issue and will have additional details in the future.” means they may release a fix much sooner than the expected Q2 that I was told last Friday. Granted this should not be VP issue, kudos, to Marc for at least providing a fix, even if it is a potential long wait.
From: Kelly McMullen (kellym(at)aviating.com)
Sent: Monday, February 04, 2013 12:50 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com) ; rv-list(at)matronics.com (rv-list(at)matronics.com)
Subject: Fwd: [MARKETING] VP-200/Dynon SkyView Service Bulletin
Well, at least Vertical Power is listening.
------
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
gengrumpy(at)aol.com
Guest
|
| Posted: Mon Feb 04, 2013 5:31 pm Post subject: RV-List: Re: Fwd: [MARKETING] VP-200/Dynon SkyView Service B |
|
|
Amen Tim!
Grumpy
Do not archive
Sent from my iPad
On Feb 4, 2013, at 4:52 PM, Tim Olson <Tim(at)MyRV10.com (Tim(at)MyRV10.com)> wrote:
[quote]I'm just glad my circuit breakers are still at release 1.0a firmware.
Saved me tons of time over the years with software revs on attached devices.
Tim
On Feb 4, 2013, at 4:01 PM, "Pascal" wrote:
[quote] According to Dynon Support -We only moved a few parameters around in the new serial stream, so it's unfortunate that it will take them months to fix this as it's likely just a few constants in their code to make it work again.
Hopefully “We are investigating the issue and will have additional details in the future.” means they may release a fix much sooner than the expected Q2 that I was told last Friday. Granted this should not be VP issue, kudos, to Marc for at least providing a fix, even if it is a potential long wait.
From: Kelly McMullen (kellym(at)aviating.com)
Sent: Monday, February 04, 2013 12:50 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com) ; rv-list(at)matronics.com (rv-list(at)matronics.com)
Subject: Fwd: [MARKETING] VP-200/Dynon SkyView Service Bulletin
Well, at least Vertical Power is listening.
------
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
