Matronics Email Lists :: View topic - CJ pitot static lines

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

CJ pitot static lines

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

rmhou(at)yahoo.com
Guest

Posted: Sun Feb 03, 2013 8:06 pm Post subject: CJ pitot static lines

I was looking for a leak (or leaks) in my pitot static lines. From the pitot tube, I traced these lines to the wing cover between outer and inner wing panels where the lines went to the very leading edge of the inner wing panel. I then removed the right interior side panel in the front cockpit but couldn't see where the lines entered the cockpit. By then it was dark so I quit. Before I continue, I thought I asked the list for your experience. Where should I look next? Remove right wing root fairing? Or, oil cooler air intake cover?Thanks in advance,Robin Hou

 [quote][b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

dougsappllc(at)gmail.com
Guest

Posted: Mon Feb 04, 2013 9:37 am Post subject: CJ pitot static lines

Robin,On the CJ there are only rubber hose connectors in a few places in the system IF you system is stock.  Starting from the pitot you have a pair of hose connectors at the rear of the pitot.  The next place where you may have a leak is in the plastic (check them for cracks as well as seal) condensation traps in the wing root.  Next check the connection between the wing and the fuse.  There are no other hose connections in the pitot system until you get to the instrument panel area. 

 



Hope this helps

Doug 



On Sun, Feb 3, 2013 at 8:04 PM, Robin Hou <rmhou(at)yahoo.com (rmhou(at)yahoo.com)> wrote:

 [quote]I was looking for a leak (or leaks) in my pitot static lines. From the pitot tube, I traced these lines to the wing cover between outer and inner wing panels where the lines went to the very leading edge of the inner wing panel. I then removed the right interior side panel in the front cockpit but couldn't see where the lines entered the cockpit. By then it was dark so I quit. 

 

Before I continue, I thought I asked the list for your experience. Where should I look next? Remove right wing root fairing? Or, oil cooler air intake cover?



Thanks in advance,



Robin Hou

   	  Quote: 	
		  



et="_blank">http://www.matronics.com/Navigator?Yak-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	
[b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum