Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

riveting question

Matronics Email Lists Forum Index -> Zenith701801-List

View previous topic :: View next topic

Author Message

caveman(at)pemtel.net
Guest

Posted: Sat Jan 26, 2013 5:53 pm Post subject: riveting question

Hi -



  I am building a 701.  I finally got to the point of riveting the 

left wing skeleton together, and I am encountering a problem.  Many 

of the rivets are close to one or more flanges, such that it is 

impossible to set the rivet tool at right angles to the work.  I 

tried going ahead and setting the rivets with the tool at an angle, 

but I'm not very happy with the results.



  Can anyone suggest a technique for setting these rivets?  I would 

really appreciate any insights.



  If you feel that this does not warrant posting on the list, please 

email me directly at caveman(at)pemtel.net.



Thanks ----

   ---- Mike Newsome

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

carlossa52(at)gmail.com
Guest

Posted: Sat Jan 26, 2013 7:53 pm Post subject: riveting question

Mike, take a look at this discussion, on top of the page.

I made something like it and use several times in tight spots. Life saver.



http://www.vansairforce.com/community/showthread.php?p=267189

  

Good luck

Carlos

CH601-HD, plans

On 26 January 2013 20:49, Mike Newsome <caveman(at)pemtel.net (caveman(at)pemtel.net)> wrote:

  [quote]--> Zenith701801-List message posted by: "Mike Newsome" <caveman(at)pemtel.net (caveman(at)pemtel.net)>

   

 Hi -

 

   I am building a 701.  I finally got to the point of riveting the

 left wing skeleton together, and I am encountering a problem.  Many

 of the rivets are close to one or more flanges, such that it is

 impossible to set the rivet tool at right angles to the work.  I

 tried going ahead and setting the rivets with the tool at an angle,

 but I'm not very happy with the results.

 

   Can anyone suggest a technique for setting these rivets?  I would

 really appreciate any insights.

 

   If you feel that this does not warrant posting on the list, please

 email me directly at caveman(at)pemtel.net (caveman(at)pemtel.net).

 

 Thanks ----

 

 

    ---- Mike Newsome

 

[b]

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

Terry Phillips

Joined: 11 Jan 2006
Posts: 346
Location: Corvallis, MT

Posted: Mon Jan 28, 2013 10:36 am Post subject: riveting question

Carlos

 

 That is a really slick little tool. I could have used that a couple of  times. Thank you for posting that.

 

 Terry

 

 [quote]    	[img]cid:part1.04000500.03030708(at)gmail.com[/img]

       	Carlos Sa (carlossa52(at)gmail.com)

         Saturday, January  26, 2013 8:52 PM

   Mike, take a look at this  discussion, on top of the page.

I made something like it and use  several times in tight spots. Life saver.



http://www.vansairforce.com/community/showthread.php?p=267189

  

Good luck

Carlos

CH601-HD, plans



    --> -- 

Terry Phillips 

 ttp444~at~gmail.com

 Corvallis MT

 ZU-601XLB/Jab 3300  s .. l .. o .. o .. o .. w  build kit - Tail &  flaps are done; 

 Upgrading wings & ailerons per the AMD Safety Directive

 http://www.mykitlog.com/N47TP/

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

compose-unknown-contact.jpg

Description:

Filesize:

770 Bytes

Viewed:

3004 Time(s)

_________________
Terry Phillips
Corvallis, MT
ttp44<at>rkymtn.net
Zenith 601XL/Jab 3300 slow build kit - Tail feathers done; working on the wings.

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith701801-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum