Matronics Email Lists :: View topic - Yak 18T/ M14P Compressor Ram Air Cooling Horn

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Yak 18T/ M14P Compressor Ram Air Cooling Horn

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

byronmfox(at)gmail.com
Guest

Posted: Wed Mar 13, 2013 9:12 pm Post subject: Yak 18T/ M14P Compressor Ram Air Cooling Horn

Because I've experienced insufficient cooling using the original Chinese horn on my M14P converted CJ, I borrowed an Yak18T horn from Vladimir and had it replicated in carbon fiber and fiber glass. New or used Y18T horns are essentially impossible to find. 



If there is enough interest, the talented fellow who made the horn will produce more, and make them available through Doug Sapp. The price will depend largely on the amount of interest generated.  Let me know if this appeals to others .

Blitz Fox

415-307-2405

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

KingCJ6(at)aol.com
Guest

Posted: Thu Mar 14, 2013 6:33 am Post subject: Yak 18T/ M14P Compressor Ram Air Cooling Horn

Would the more widely available  brass French horn also be a compatible replacement? 

  

  In a message dated 3/13/2013 10:13:00 P.M. Pacific Daylight Time,  byronmfox(at)gmail.com writes:

  	  Quote: 	
		  -->    Yak-List message posted by: Byron M Fox    <byronmfox(at)gmail.com>



Because I've experienced insufficient    cooling using the original Chinese horn on my M14P converted CJ, I borrowed an    Yak18T horn from Vladimir and had it replicated in carbon fiber and fiber    glass. New or used Y18T horns are essentially impossible to find. 



If    there is enough interest, the talented fellow who made the horn will produce    more, and make them available through Doug Sapp. The price will depend largely    on the amount of interest generated.  Let me know if this appeals to    others .

Blitz  sp;    ies  ay                 - MATRONICS WEB FORUMS               - List Contribution Web Site  p;                             



	


 [quote][b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

viperdoc(at)mindspring.co
Guest

Posted: Thu Mar 14, 2013 9:55 am Post subject: Yak 18T/ M14P Compressor Ram Air Cooling Horn

Throw my name on the list please.

Doc Kemp



Sent from my iPad



On Mar 14, 2013, at 9:30 AM, KingCJ6(at)aol.com (KingCJ6(at)aol.com) wrote:

[quote]      

Would the more widely available  brass French horn also be a compatible replacement? 

  

  In a message dated 3/13/2013 10:13:00 P.M. Pacific Daylight Time,  byronmfox(at)gmail.com (byronmfox(at)gmail.com) writes:

  	  Quote: 	
		  -->    Yak-List message posted by: Byron M Fox    <byronmfox(at)gmail.com (byronmfox(at)gmail.com)>



Because I've experienced insufficient    cooling using the original Chinese horn on my M14P converted CJ, I borrowed an    Yak18T horn from Vladimir and had it replicated in carbon fiber and fiber    glass. New or used Y18T horns are essentially impossible to find. 



If    there is enough interest, the talented fellow who made the horn will produce    more, and make them available through Doug Sapp. The price will depend largely    on the amount of interest generated.  Let me know if this appeals to    others .

Blitz  sp;    ies  ay                 - MATRONICS WEB FORUMS               - List Contribution Web Site  p;                             



	


  	  Quote: 	
		  

	


[b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

dougsappllc(at)gmail.com
Guest

Posted: Thu Mar 14, 2013 10:40 am Post subject: Yak 18T/ M14P Compressor Ram Air Cooling Horn

The addition of the 18T style cooling horn on the air compressor should extend the life of the compressor because it will allow it to run both cooler and cleaner.  With the price of new compressors being just north of $1000.00 now, this may be something to consider. 



Doug



On Thu, Mar 14, 2013 at 10:52 AM, Roger Kemp M.D. <viperdoc(at)mindspring.com (viperdoc(at)mindspring.com)> wrote:

 [quote]Throw my name on the list please.

Doc Kemp



Sent from my iPad

 

On Mar 14, 2013, at 9:30 AM, KingCJ6(at)aol.com (KingCJ6(at)aol.com) wrote:

 	  Quote: 	
		        

Would the more widely available  brass French horn also be a compatible replacement? 

  

  In a message dated 3/13/2013 10:13:00 P.M. Pacific Daylight Time,  byronmfox(at)gmail.com (byronmfox(at)gmail.com) writes:

  	  Quote: 	
		  -->    Yak-List message posted by: Byron M Fox    <byronmfox(at)gmail.com (byronmfox(at)gmail.com)>



Because I've experienced insufficient    cooling using the original Chinese horn on my M14P converted CJ, I borrowed an    Yak18T horn from Vladimir and had it replicated in carbon fiber and fiber    glass. New or used Y18T horns are essentially impossible to find. 



If    there is enough interest, the talented fellow who made the horn will produce    more, and make them available through Doug Sapp. The price will depend largely    on the amount of interest generated.  Let me know if this appeals to    others .

Blitz  sp;    ies  ay                 - MATRONICS WEB FORUMS               - List Contribution Web Site  p;                             



	


  	  Quote: 	
		  

	






3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



	


[b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum