 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
n8vim(at)arrl.net
Guest
|
 Posted: Sat Mar 30, 2013 7:38 am Post subject: F-1013 Twist: R but not L ? |
 |
|
Hi all,
I'm on section 29-3, Step 3: "Clamp the F-1013-R Fwd Fuse Longeron
in a padded vise at the "forward twist mark". Twist the fwd fuse
longeron with a crescent wrench as shown in Figure 2 to obtain the
dimension shown in Figure 3. Clamp the fwd fuse longeron at the "aft
twist mark". Repeat the process using the twist direction shown in
Figure 1 to obtain the dimension shown in Figure 3."
So they say to twist the forward and aft parts of the right longeron,
but what about the forward part of the LEFT longeron? (The aft twist
does not apply to the left longeron, since the dimension shown won't
allow it.)
I can't see any difference in symmetry in the forward sections of either
L or R F-1013 longerons. Is it the plans missing it, or are you really
not supposed to twist the forward part F-1013 left longeron?
Thanks for your time!
-Jim #40384
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
charliewaffles
Joined: 15 Mar 2011
Posts: 18
|
| Posted: Sat Mar 30, 2013 4:19 pm Post subject: Re: F-1013 Twist: R but not L ? |
|
|
You twist both front ends the same way, as shown in Figure 2. You are essentially twisting the longeron UP so that it transitions to the firewall weldaments later on.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
n8vim(at)arrl.net
Guest
|
| Posted: Sat Mar 30, 2013 5:14 pm Post subject: F-1013 Twist: R but not L ? |
|
|
That was my first thought as well, but if you read the whole page
carefully, it never says to twist the left F-1013.
Although it wouldn't be the first omission I've seen so far (the most
recent was the roll construction angles - it doesn't say what thickness
material to use!).
-Jim 40384
On 3/30/2013 8:19 PM, charliewaffles wrote:
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Kellym
Joined: 10 Jan 2006
Posts: 1705
Location: Sun Lakes AZ
|
| Posted: Sat Mar 30, 2013 6:32 pm Post subject: F-1013 Twist: R but not L ? |
|
|
You will find many places they give drawing/instructions for one side
and tell you to mirror image the other side, if they mention it at all.
On 3/30/2013 6:08 PM, James Hein wrote:
| Quote: |
That was my first thought as well, but if you read the whole page
carefully, it never says to twist the left F-1013.
Although it wouldn't be the first omission I've seen so far (the most
recent was the roll construction angles - it doesn't say what
thickness material to use!).
-Jim 40384
On 3/30/2013 8:19 PM, charliewaffles wrote:
>
>
> You twist both front ends the same way, as shown in Figure 2. You are
> essentially twisting the longeron UP so that it transitions to the
> firewall weldaments later on.
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=397362#397362
>
|
-----
No virus found in this message.
Checked by AVG - www.avg.com
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
