Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Door Question

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
vernon.franklin(at)gmail.
Guest
PostPosted: Sat Apr 27, 2013 5:16 pm    Post subject: Door Question Reply with quote
I have started working on the doors.
I drilled the fwd and aft index holes as indicated on 45-02, but when I lay the door up, only the aft index hole matches.  The forward hole is about 4 inches higher than when the fuselage "missing" rivet is.


Both doors are like this, with the fwd dimples about 4 inches higher than the plans show.  
Has anyone else run into this issue?


--
Vernon Franklin

[quote][b]

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
davidsoutpost(at)comcast.
Guest
PostPosted: Sat Apr 27, 2013 7:01 pm    Post subject: Door Question Reply with quote
Mine were that way also. I made a rivet hole transfer tool to locate the empty dimpled rivet hole on the door. IIRC, Avery Tool carries these.

David Clifford

RV-10 Builder
Howell, MI
From: "Vernon Franklin" <vernon.franklin(at)gmail.com>
To: rv10-list(at)matronics.com
Sent: Saturday, April 27, 2013 9:15:32 PM
Subject: Door Question

I have started working on the doors.
I drilled the fwd and aft index holes as indicated on 45-02, but when I lay the door up, only the aft index hole matches. The forward hole is about 4 inches higher than when the fuselage "missing" rivet is.


Both doors are like this, with the fwd dimples about 4 inches higher than the plans show.
Has anyone else run into this issue?


--
Vernon Franklin

[quote]
[b]

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Bob Turner



Joined: 03 Jan 2009
Posts: 885
Location: Castro Valley, CA
PostPosted: Sat Apr 27, 2013 7:02 pm    Post subject: Re: Door Question Reply with quote
As I recall, the index holes on the inner and outer door halves did not all line up for me, either. The lines and scribe marks on my fiberglass parts were hard to impossible to see.

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Bob Turner
RV-10 QB
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group