Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

wire covers

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

trigo(at)mail.telepac.pt
Guest

Posted: Sat May 04, 2013 5:29 am Post subject: wire covers

Guys

 

I know it is a small detail, but my manual has no indication about what to do to the small tab (you can see it in the attached picture) which comes in both the F-1042G- L & R wire covers to be installed in each side of the fuselage, near the instrument panel.

 

Are those tabs to be bended up, and then make a hole and rivet them to the fuselage skins? 

Or are they to be bended down and just inserted between the skin and the longeron?

 

Thanks

Carlos

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

IMG_1397.JPG

Description:

Filesize:

2.13 MB

Viewed:

1552 Time(s)

dave.saylor.aircrafters(a
Guest

Posted: Sat May 04, 2013 5:49 am Post subject: wire covers

I think that just gets cut off.  IIRC the screws are the only thing attaching the cover to the fuselage.

   



You might want to think carefully about the forward vertical screw.  It can be tricky to remove once the glareshield goes in.  If it protrudes very high, it can get in the way of panel going in or coming out.  An allen-type screw might be helpful there, or a flush screw.

   



Dave Saylor

[url=tel:831-750-0284]831-750-0284[/url] CL

 



On Sat, May 4, 2013 at 6:28 AM, Carlos Trigo <trigo(at)mail.telepac.pt (trigo(at)mail.telepac.pt)> wrote:

[quote]    

Guys

 

I know it is a small detail, but my manual has no indication about what to do to the small tab (you can see it in the attached picture) which comes in both the F-1042G- L & R wire covers to be installed in each side of the fuselage, near the instrument panel.    

 

Are those tabs to be bended up, and then make a hole and rivet them to the fuselage skins?     

Or are they to be bended down and just inserted between the skin and the longeron?

 

    Thanks

Carlos   

 

 

 

     



[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum