idleup
Joined: 06 Aug 2011
Posts: 19
|
 Posted: Mon Apr 29, 2013 1:08 pm Post subject: Questions for Bob after talking to B&C... |
 |
|
Bob,
B&C recommended I ask you these questions because they did not know the answer for them. As you may know, they have a document called the 504-500 linked here http://www.bandc.biz/pdfs/504-500_REV_G.pdf. This document shows wiring of the S704-1 when using the PMR1C-14 regulator for the SD-8. Anyway, the wiring on the newest revision of Z-13/8 (R) conflicts with their wiring diagram on a couple of points, can you please help me understand which one I should use? Here are specifically my questions that remained unanswered after talking to them:
1. On Z-13/8 (R) you have a jumper going between the positive side of the coil and the common pin. On their 505-500 they have nothing. On your older Z-13/8 (Q) you had a diode. What is the reason for this and which one should I follow?
2. On Z-13/8 (R) you have wired the common on the relay with a 30A inline fuse. On their 504-500 they used a 10A breaker. Both are wired using a 14AWG wire. What is the reason for such a large fuse? Should I really use 30A on this?
I think that is it for now.
Thanks,
Matt
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
