Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

SS7 rudder pedal install question

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List
View previous topic :: View next topic  
Author Message
n223rv(at)wolflakeairport
Guest
PostPosted: Fri May 03, 2013 3:32 pm    Post subject: SS7 rudder pedal install question Reply with quote
I am building a SS7 and am getting ready to fab and install the adjustable rudder pedals. One question I have while reading the plans, I don't see how you space the inboard pedal so the 2 bolts holding the adjustable pedal control wheels do not contact each other. It seems that the bolt heads will hit after you install the plastic bushings and drill the assembly to keep your 1/32" side to side clearance.

What am I missing? Picture attached.

Thanks

-Mike Kraus
RV-4 sold Sad
RV-10 flying Smile
KitFox SS7 Radial building Smile


<pre><b><font size=3D2 color="#000000" face=3D"courier new,courier">

- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List


image.png
 Description:
 Filesize:  314.03 KB
 Viewed:  4129 Time(s)

image.png
Back to top
7suds(at)Chartermi.net
Guest
PostPosted: Tue May 07, 2013 6:29 pm    Post subject: SS7 rudder pedal install question Reply with quote
Mike,
Not sure if anyone has had an opportunity to help you yet, I am in the
middle of replacing my rudder cables on my Model 5, so I am working with the
very items you have concern with. I will snap a shot of my standoffs for the
pulleys next time I'm at the hanger. From what I remember, my screw heads
have clearance and the only difference from your pic is the bushing you have
laying in front of your shaft is installed on mine and seems to help create
the separation you are looking for.

Lloyd C KF 5 Outback
912ul IVO IFA Northern Mi
--

- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
n223rv(at)wolflakeairport
Guest
PostPosted: Tue May 07, 2013 7:03 pm    Post subject: SS7 rudder pedal install question Reply with quote
Hi Lloyd,

Thanks for the reply. I am going to sand off the paint and install the bushings, but from looking at it, it doesn't appear the bushing will give me enough spacing. Maybe once I assemble it, it will become more clear.

Where in northern Mi are you? I'm at 26W near Jackson.

-Mike Kraus
RV-4 sold Sad
RV-10 flying Smile
KitFox SS7 Radial building Smile

On May 7, 2013, at 10:29 PM, "Lloyd & Lorrie Cudnohufsky" <7suds(at)Chartermi.net> wrote:

[quote]

Mike,
Not sure if anyone has had an opportunity to help you yet, I am in the
middle of replacing my rudder cables on my Model 5, so I am working with the
very items you have concern with. I will snap a shot of my standoffs for the
pulleys next time I'm at the hanger. From what I remember, my screw heads
have clearance and the only difference from your pic is the bushing you have
laying in front of your shaft is installed on mine and seems to help create
the separation you are looking for.

Lloyd C KF 5 Outback
912ul IVO IFA Northern Mi


--

- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
Lynn Matteson



Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan
PostPosted: Wed May 08, 2013 11:38 am    Post subject: SS7 rudder pedal install question Reply with quote
26W???? That's practically my backyard....do I know you, Mike? I fly
in there from time to time with my orange Kitfox IV, and have done so
on wheels and skis. I didn't know there was a Kitfox being built in
the area.

Lynn Matteson
Kitfox IV Speedster, taildragger
Jabiru 2200, #2062
Prince prop 64 x 30, P-tip
Electroair direct-fire ignition system
Rotec TBI-40 injection (sleeved to 36mm)
Status: flying with 1430 hrs... (since 3-27-2006)

On May 7, 2013, at 11:02 PM, Michael Kraus wrote:

[quote]
<n223rv(at)wolflakeairport.net>

Hi Lloyd,

Thanks for the reply. I am going to sand off the paint and install
the bushings, but from looking at it, it doesn't appear the bushing
will give me enough spacing. Maybe once I assemble it, it will
become more clear.

Where in northern Mi are you? I'm at 26W near Jackson.

-Mike Kraus
RV-4 sold Sad
RV-10 flying Smile
KitFox SS7 Radial building Smile

On May 7, 2013, at 10:29 PM, "Lloyd & Lorrie Cudnohufsky"
<7suds(at)Chartermi.net> wrote:

>
> <7suds(at)chartermi.net>
>
> Mike,
> Not sure if anyone has had an opportunity to help you yet, I am in
> the
> middle of replacing my rudder cables on my Model 5, so I am
> working with the
> very items you have concern with. I will snap a shot of my
> standoffs for the
> pulleys next time I'm at the hanger. From what I remember, my
> screw heads
> have clearance and the only difference from your pic is the
> bushing you have
> laying in front of your shaft is installed on mine and seems to
> help create
> the separation you are looking for.
>
> Lloyd C KF 5 Outback
> 912ul IVO IFA Northern Mi
> --

- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM
Back to top
View user's profile Send private message Send e-mail
7suds(at)Chartermi.net
Guest
PostPosted: Thu May 09, 2013 3:45 pm    Post subject: SS7 rudder pedal install question Reply with quote
Hello Mike,
I'm at KIMT Ford Airport, out of Iron Mountain in the upper peninsula. , I
have yet to make it back to the hanger, so I have no pics of my peddles to
share, it has been a rough week at work, looking forward to the weekend.
Also, I see you have a little experience with RV's, my hanger partner has an
RV-7A, he is pushing 600 hours flying time on it, it is a hoot to fly in.

Lloyd

--

- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
n223rv(at)wolflakeairport
Guest
PostPosted: Thu May 09, 2013 4:59 pm    Post subject: SS7 rudder pedal install question Reply with quote
To circle back, I forwarded my note to John McBean. He said there are a few builders who have the problem I mentioned and they have created a bushing with a wider flange to ensure the bolt head clearances. He is going to send me out a set! Sounds like I'm all set.

Thanks

-Mike Kraus
RV-4 sold Sad
RV-10 flying Smile
KitFox SS7 Radial building Smile

On May 9, 2013, at 7:44 PM, "Lloyd & Lorrie Cudnohufsky" <7suds(at)Chartermi.net> wrote:

[quote]

Hello Mike,
I'm at KIMT Ford Airport, out of Iron Mountain in the upper peninsula. , I
have yet to make it back to the hanger, so I have no pics of my peddles to
share, it has been a rough week at work, looking forward to the weekend.
Also, I see you have a little experience with RV's, my hanger partner has an
RV-7A, he is pushing 600 hours flying time on it, it is a hoot to fly in.

Lloyd

--

- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group