jconnell(at)fmwildblue.co
Guest
|
 Posted: Mon Jun 24, 2013 7:47 am Post subject: Subject: RotaxEngines-List: ground wire |
 |
|
Hi,
My 582 brown wire is grounded to the engine. The ground wire from the Key West regulator is grounded to the frame. The engine is grounded to the frame with a braided strap – it needs to be heavy to handle the load when the starter is engaged. A lot of guys bring everything to a common ground on the aircraft. I did this in my RV-9A. See attached pictures for RV common ground and 582 ground strap.
All the best...
Joe
Time: 11:24:01 PM PST US
From: TURBO T <turbot(at)shaw.ca (turbot(at)shaw.ca)>
Subject: RotaxEngines-List: ground wire
Where should the brown ground wire on a 532 be attached to ?
To airframe & engine block ?
Am in process of installing a Key West regulator that has a 12Volt DC plug that
is labeled to ground.
It should probably go to frame & block also, But would it be a good idea to connect
it to the brown engine wire also ?
Thanks
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
| Description: |
|
| Filesize: |
597.39 KB |
| Viewed: |
1295 Time(s) |
|
| Description: |
|
| Filesize: |
386.55 KB |
| Viewed: |
1295 Time(s) |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
