 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Gpjann(at)aol.com
Guest
|
 Posted: Sun Jun 11, 2006 1:06 pm Post subject: Question on JD Alt Regulator |
 |
|
Would appreciate any help you might offer...
Reference to John Deere Alternator Regulator pin #5 ...
Where does this pin go to:
.direct to battery
.plus (+) buss bar
.or where?
Thanks
GPJ
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
 |
cleone(at)rr1.net
Guest
|
| Posted: Mon Jun 12, 2006 6:49 am Post subject: Question on JD Alt Regulator |
|
|
GPJ, That is a Very Good question. I would also like to know. From diagrams on web sites I've seen it is usually connected to the + buss bar with small wire as if it were sensing the output voltage. I would think that could done internally, but I'm no engineer. If you get the answer off list please pass it on to me. Thanks. Cleone
Do not archive
At 04:04 PM 6/11/06, you wrote:
| Quote: | Would appreciate any help you might offer...
Reference to John Deere Alternator Regulator pin #5 ...
Where does this pin go to:
.direct to battery
.plus (+) buss bar
.or where?
Thanks
GPJ |
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
ding(at)tbscc.com
Guest
|
| Posted: Mon Jun 12, 2006 12:35 pm Post subject: Question on JD Alt Regulator |
|
|
GPJ,
I have regulator no. AM101406, which I think supercedes AM126304. This unit has no connection numbers stamped or printed on it, but I have a charging circuit diagram from John Deere. Looking at the finned side, with the five terminals at the top, starting on the left:
1 - direct to battery (at starter connection)
2 - to alternator
3 - to alternator
4 - to indicator lamp (other lamp connection to ground)
5 - through 10 amp fuse (or breaker) to ignition, hot only when key is on
Hope this is useful,
Lynn 601XL Corvair 35%
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
n282rs(at)earthlink.net
Guest
|
| Posted: Mon Jun 12, 2006 2:40 pm Post subject: Question on JD Alt Regulator |
|
|
Greg
Have you looked at this? http://home.hiwaay.net/~langford/corvair/dynamo.html I followed this when I did mine
Randy Stout
n282rs"at"earthlink.net
www.geocities.com/r5t0ut21
| Quote: | At 04:04 PM 6/11/06, you wrote:
| Quote: | Would appreciate any help you might offer...
Reference to John Deere Alternator Regulator pin #5 ...
Where does this pin go to:
.direct to battery
.plus (+) buss bar
.or where?
Thanks
GPJ |
|
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
