Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Airplast Propeller

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

uvtreith(at)t-online.de
Guest

Posted: Thu Jun 20, 2013 3:08 pm Post subject: Airplast Propeller

Hi Europa Family,  

   

I would like to know more about Airplast Propeller.  

The only information, which I can find within the web is only in French and without contacts.  

Are there information in English available and who is the person which I could contact for repair and/or purchase reasons?  

Many thanks for help.  

   

Bruno Reith  

Monowheel XS-Mercedes-Brabus engine-Warp Drive  

       [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

grahamsingleton(at)btinte
Guest

Posted: Thu Jun 20, 2013 11:53 pm Post subject: Airplast Propeller

Bruno

try +33 490745289 and arplast(at)wnadoo.fr also



Alain Petit; hal.1(at)wanadoo.fr



        From: UVTREITH <uvtreith(at)t-online.de>

 To: europa-list(at)matronics.com 

 Sent: Friday, 21 June 2013, 0:07

 Subject: Europa-List: Airplast Propeller

  

 

                 Hi Europa Family,

     

   I would like to know more about Airplast Propeller.

   The only information, which I can find within the web is only in French and without contacts.

   Are there information in English available and who is the person which I could contact for repair and/or purchase reasons?

   Many thanks for help.

     

   Bruno Reith

   Monowheel XS-Mercedes-Brabus engine-Warp Drive

   

       [quote]http://www.matronics.com/con================


[b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Alan Carter

Joined: 02 Jul 2012
Posts: 378
Location: Kent, England.

Posted: Fri Jun 21, 2013 2:42 am Post subject: Re: Airplast Propeller

Hi All.

I have a PV 50 constant speed prop.

As far as" looks go", it is one of the best looking blades I have seen on Europa's.

So far I have had no trouble with the prop, however the blades have a lot of free play in them when you wiggle them about, ? I am told this is normal on the PV 50, the only servicing I know of is to grease the Lead Screw once a year at permit renewal.

As far a contacting them, its hopeless unless you speak French, they seem to have a hang up on this, so if English is your language you have a big problem.

Now 12000 miles away in New Zealand you have AirMaster, speak English and will answer the phone, or reply to your e-mail the next day.

Good prop, but its not as nice looking as the PV 50.



Regards 

Alan



Ps Please let me know if you get to speak to Arblast on the numbers given by Graham

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

grahamsingleton(at)btinte
Guest

Posted: Fri Jun 21, 2013 8:18 am Post subject: Airplast Propeller

Best approach is probably to stumble along in French and they might take pity, tell them I said they were good people.

which they are, a bit apologetic about their English but also bruised by past contact with PFA.

Graham

        From: Alan Carter <alancarteresq(at)onetel.net>

 To: europa-list(at)matronics.com 

 Sent: Friday, 21 June 2013, 11:43

 Subject: Re: Airplast Propeller

--> Europa-List message posted by: "Alan Carter" <alancarteresq(at)onetel.net (alancarteresq(at)onetel.net)>

Hi All.

I have a PV 50 constant speed prop.

As far as" looks go", it is one of the best looking blades I have seen on Europa's.

So far I have had no trouble with the prop, however the blades have a lot of free play in them when you wiggle them about, ? I am told this is normal on the PV 50, the only servicing I know of is to grease the Lead Screw once a year at permit  renewal.

As far a contacting them, its hopeless unless you speak French, they seem to have a hung up on this, so if English is your language you have a big problem.

Now 12000 miles away in New Zealand you have AirMaster, speak English and will answer the phone, or reply to your e-mail the next day.

Good prop, but its not as nice looking as the PV 50.

Regards 

Alan

Ps Please let me know if you get to speak to Arblast on the number give bt Graham

Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=403079#4many List utilities such as List -> http://forums.matronics.comhttp://ww=======================

 [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum