Matronics Email Lists :: View topic - RV8-List: Tailwheel Bearing

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

RV8-List: Tailwheel Bearing - Separating Bronze Bearing...

Matronics Email Lists Forum Index -> RV8-List

View previous topic :: View next topic

Author Message

Mike Koehn

Joined: 21 Jul 2011
Posts: 6
Location: Seattle, WA

Posted: Mon Jul 01, 2013 11:11 pm Post subject: RV8-List: Tailwheel Bearing - Separating Bronze Bearing...

I was faced with the same situation on the 8 but had second thoughts about

removing the bushing. In the end I left it in and had the painters

ultrasonically strip the thing in the degreaser tank. That worked reasonably

well.  In the end there was a very small amount of oil that leached out of

the bearing or surround during the bake cycle which stained the powder coat

at one small spot on the bottom (depends probably on which way you hang it

on the rack) which even with the white coating was almost unnoticeable.  Am

satisfied with the paint job and it surely was better than beating the

housing senseless with a hammer...



--

- The Matronics RV8-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List

_________________
"Testing is what we do when we don't know what we are doing"
Dr. Wernher von Braun

Display posts from previous:

	Matronics Email Lists Forum Index -> RV8-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum