 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
berkut13(at)berkut13.com
Guest
|
 Posted: Thu Jul 04, 2013 9:53 am Post subject: Narco Transponder Tray Coax Connector |
 |
|
Can someone point me to the part number/source for a replacement 90-degree,
bulkhead, slide-on, coax connector used on the Narco AT-150 transponder
tray? Any of the usual suspects (Mouser, Digi-Key, Allied, etc) carry
them?
Thanks,
James
| | - The Matronics Avionics-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Avionics-List |
|
|
|
| Back to top |
|
 |
douglist(at)macnauchtan.c
Guest
|
| Posted: Thu Jul 04, 2013 10:43 am Post subject: Narco Transponder Tray Coax Connector |
|
|
At 12:52 -0500 7/4/13, <berkut13(at)berkut13.com> wrote:
| Quote: |
Can someone point me to the part number/source for a replacement 90-degree, bulkhead, slide-on, coax connector used on the Narco AT-150 transponder tray? Any of the usual suspects (Mouser, Digi-Key, Allied, etc) carry them?
|
<http://www.brackemfg.com> Bracke Manufacturing, LLC CC.
sales(at)brackemfg.com
<http://www.pasternack.com> Pasternaclk Enterprises, Inc CA
techsupport(at)pasternack.com
Both of those keep sending me catalogs but I have never bought anything. Prices are way up in the sky and they seem to want to know how many thousands you want.
The Digi-key web site tells all. Mouser is catching up rapidly.
I may have a used Narco tray here. Offline to dmcnutt AT same domain with Narco in the subject.
Is that transponder still legal? There were some problems with it two decades ago.
--
--> The best programming tool is a soldering iron <--
| | - The Matronics Avionics-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Avionics-List |
|
|
|
| Back to top |
|
|
Kellym
Joined: 10 Jan 2006
Posts: 1705
Location: Sun Lakes AZ
|
| Posted: Thu Jul 04, 2013 1:08 pm Post subject: Narco Transponder Tray Coax Connector |
|
|
Single AD to comply with a Narco service bulletin back in 2004 with
regard to responses to mode S interrogation. Only applies to a certain
serial number range.
Any Narco transponder from AT-50 up through AT165 use same tray and
pinout. So even if one specific unit is bad, there are plenty of good
ones in service to get a replacement.
On 7/4/2013 11:42 AM, Doug McNutt wrote:
| Quote: |
At 12:52 -0500 7/4/13, <berkut13(at)berkut13.com> wrote:
> Can someone point me to the part number/source for a replacement 90-degree, bulkhead, slide-on, coax connector used on the Narco AT-150 transponder tray? Any of the usual suspects (Mouser, Digi-Key, Allied, etc) carry them?
<http://www.brackemfg.com> Bracke Manufacturing, LLC CC.
sales(at)brackemfg.com
<http://www.pasternack.com> Pasternaclk Enterprises, Inc CA
techsupport(at)pasternack.com
Both of those keep sending me catalogs but I have never bought anything. Prices are way up in the sky and they seem to want to know how many thousands you want.
The Digi-key web site tells all. Mouser is catching up rapidly.
I may have a used Narco tray here. Offline to dmcnutt AT same domain with Narco in the subject.
Is that transponder still legal? There were some problems with it two decades ago.
|
-----
No virus found in this message.
Checked by AVG - www.avg.com
| | - The Matronics Avionics-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Avionics-List |
|
_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD |
|
| Back to top |
|
|
john(at)carpenteravionics
Guest
|
| Posted: Thu Jul 04, 2013 1:19 pm Post subject: Narco Transponder Tray Coax Connector |
|
|
If you are referring to the tray mounted coax connector which is typically a
TED brand connector like is used on most tray mount avionics of that
generation, you can probably use the Deklin DBA-600. It mounts to the tray
the same way (cir-clip) but has a BNC on the other end so you don't have to
try to solder the coax on which is a challenge.
Best regards,
John DenDekker
www.carpenteravionics.com
800.300.0352 Toll Free
615.355.9970 office
NOTICE: This electronic transmission (including any referenced or attached
materials) is covered by the Electronic Communications Privacy Act, 18
U.S.C. Sec. 2510-2521, and is PRIVILEGED, WORK PRODUCT, PROPRIETARY and/or
CONFIDENTIAL. It is not intended for transmission to, or receipt by, any
unauthorized person. If you have received this transmission in error you are
PROHIBITED from disclosing, disseminating, reproducing, using or relying
upon it. Please immediately delete it from your system without copying and
notify the sender by return e-mail of the erroneous receipt. Thank you.
--
| | - The Matronics Avionics-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Avionics-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
